I also use a MikroTik 3011 and have experienced a similar issue with my Apple TV, which couldn't access any external network resources. Initially, the problem resolved itself but then reoccurred. I found that manually removing the IP from the ARP table immediately restored connectivity. Upon checki...

tnx for reply, they do have Ip addresses and all! actually the local traffic works fine! all the clients can communicate to each other just the mikrotik mac address does not exist in arp /a table of clients! although the mikrotik table is fine and it has all the clients mac addresses!

hi I have a problem with updating the arp table in clients suddenly and I couldn`t figure out what is the problem! we have a 3011 router in the router with dhcp and hotspot enabled, suddenly I noticed some devices lost the internet connection! searching and find out that they cant ping the router be...

hi I have a hotspot on my router that is working well with local users and also working good with usermanager. I`ve got two problems one there are always too many of the same user and same mac address session on session tab on usermanager that I should be manually remove! I don't think it should be ...

upgrade to 7.1.1 and some problem came up have to roll back all the routers to 6.49.2, now i just upgrade my home 951u , router s goes to boot loop ,reset the router restore the backup config and agian stuck in noot loop , couldnt downgrade so decide to config manually from scratch, now winbox disco...

updated all my routers there was a weird problem in one of 750g routers bridge port , all the clients could ping the upper router except the router itself ! had to remove bridge and its ports and add it again, the arp was good and it was working with no problem with 6.47.8

hi
my plan is to provide local access for all wifi and ethernet users and in desired moment manually connect to login page and use username and password to connect to internet, the problem is the auto popup of login page and disconnection of wifi users!
how can i solve these problems?
regards

hi there is so much filtering going on in my country and I have manged to setup some VPN in my router and make a list of filtered IPs and a mangle rule to direct any request to these IPs to VPN route. everything is working fine except that sometimes I just can`t connect with some applications or sit...

hi all
there`s one router that is handling pppoe connection for two house nas each one has its own vpn connection that should go through their own pppoe, how to set vpn connection to connect through the specified route!? while the two vpn connect to same ip! ?

Make sure the date and clock on both sides are the same. That solved my problem!

update
the problem solved by taking out my own IP from my country IP list! now what is the right way to solve the problem?

its l2tp and default route is unchecked.
I`ve write two default route one with main routing mark and other with routing mark assigned in mangle for foreign IPs, and one route rule for server of vpn, to be go through default gateway

hi here we have some internet filtering in my country so i have set some vpn on my router and its working. just wanted to pass country ip through default gateway and other countries through vpn, so assign mangle rule for not ip list of my country for routing mark and in routing table assign vpn gate...

hey. in my recent project i`ve created hotspot for customers and they`re connecting with no problem. employees are connecting through the hotspot with different user profile. they should have access to the office server from public ip address but they`re behind hotspot! how can i solve this issue? t...