MikroTik

muhanadali

I make everything but same proplem

I have had the device for 4 years and have not faced any problem. Only when I updated to version 7 did I encounter this problem
What happened when you did the Netinstall procedure?

it's flashing normally but when start it's have same proplem

muhanadali

Netinstall it. If the CCR1036 is an r1 version, could be failing power supply.. Many of the r1 units had poor quality caps in them. Right now my CCR1036 is showing 23.3v and it is making me nervous because I can't do anything about it (would require a plane ticket to get to) if it fails. I make eve...

muhanadali

I have CCR1036-12G-4S I upgrade from V6 to v7 when it's beta I encountered a problem, then I went back to the old version, and after a while I switched to the stable version 7.1 But the same problem occurred in the previous version, and now it occurs in the latest version because of my need for Wire...

muhanadali

how i can install Technitium DNS Server on docker ?
anyone can help me ?
https://hub.docker.com/r/technitium/dns-server

muhanadali

I have Media Converter Fx to Tx it's working with Cisco,Tenda,Tp-Link

But don't working with Mikrotik !!!!!

I check it with
Rb 1009
RB 1036
CRS 125

but don't working with all the Mikrotik Servers

the Mikrotik Read the Tx only So it don't send DHCP Or PPPOE-Server

muhanadali

I have CRS112-8G-4S-IN I configuration with bridge and hardware offload to all Ethernet But the maximum Bandwidth 350Mbps !!!!! in the page test of Mikrotik Switching results Non blocking Layer 1 throughput 12Gbps Non blocking Layer 1 capacity 24Gbps But i don't get the result in my CRS 112 Why ? an...

muhanadali

RouterOS version 7.2.1 has been released in "v7 stable" channel! Before an upgrade: 1) Remember to make backup/export files before an upgrade and save them on another storage device; 2) Make sure the device will not lose power during upgrade process; 3) Device has enough free storage spac...

muhanadali

RouterOS V7 Don't Exit The user from PPP Active after Disconnected the users It's Exit from the Mikrotik Radius but it's stil showing it's connected in PPP active RouterBoard : 1009 , 1036 Version(1009) : 7.2.1 Version (1036) : 7.1.5 the two RouterBoard has same proplem this video for the proplem ht...

muhanadali

CCR 1036 Always Crash after upgrade to 7.1.3

It's Crash Between 15-20-30 Minutes after Power On

after crash It's open normally But don't show anything and the Uptime 00:00:00
Date 00:00:00
CPU 0
Time 00:00:00

and Don't show anything in Dashboard

muhanadali

have you checked this:

viewtopic.php?t=143429

no that's not i want

muhanadali

in ppp profile script if i use ssh like /system ssh-exec address=1.1.1.1 user=1 port=22 "/ppp secret set [find name=1] remote-address=$"local-address"" the ssh don't working with private key !!!! in /system script it's working good but in ppp profile don't working like the ppp pr...

muhanadali

@jotne: I think OP talks about no password parameter in the ssh-exec command. @muhanadali: It is not possible to hardcode the password into your script and I would strongly advice against leaving your router without password. If you want to use ssh-exec with some script (i.e. you can't interactivel...

muhanadali

I think he was talking about not put a password on the remote router, and then use the script without password.
Not recommended.

yes that's what i mean

muhanadali

:system ssh-exec user=remote address=<IP> command="{<cmds>}"

why i can't use password ?

Is it reasonable to leave the device without a password just because I need this feature ?

muhanadali

for ssh connections via script, you need to use this command:

:system ssh-exec user=remote address=<IP> command="{<cmds>}"

thanx it's working , but how can i use the password for remote user ?

muhanadali

The script in new terminal was working

but in /system script don't working

system ssh 1.1.1.1 user=1 port=22 "/ppp secret set [find name=as] remote-address=1.1.1.1"

version : 7.1.1

muhanadali

I have 2 Routerboard First = 11.11.11.1 Two = 11.11.11.2 an first i have a ppp user have an remote ip like 1.1.1.1 an two i have a dstnat have an a dst.address like 2.2.2.2 i need to connect first routerboard to another routerboard and get the ip of the dstnat and put in to a ppp user in first like ...

muhanadali

I have 3 PPPoE-Client in mikrotik Server the route use 1 gateway of the 3 pppoe-client if i use vpn , i can ping to pppoe-client-1 because it's the default route but i can't ping to pppoe-client(2-3) because no gateway i need to ping to all pppoe-client by the vpn server , any idea to fixed this pro...

muhanadali

OK, paste this on terminal: /ppp profile add change-tcp-mss=yes name="default autoNAT 1" on-up="/ip fire nat set [find where comment=\"changeMe1\" ] dst-address=\$\"local-address\"" add change-tcp-mss=yes name="default autoNAT 2" on-up="/ip fir...

muhanadali

what of your 2 pppoe-client must modify the nat rule? /ip firewall nat add action=dst-nat chain=dstnat dst-address=10.140.70.16 dst-port=80,443 \ protocol=tcp to-addresses=10.20.20.2 comment=1 add action=dst-nat chain=dstnat dst-address=10.140.70.19 dst-port=80,443 \ protocol=tcp to-addresses=10.20...

muhanadali

"to src-nat number 0 in dst-address" this is not clear for me i mean the local-address that get from script when pppoe-client is up insert inside a dstnat in firewall nat my proplem is how to get the local-address from the pppoe-client first paste this on terminal and put on forum the res...

muhanadali

"to src-nat number 0 in dst-address"

this is not clear for me

i mean the local-address that get from script when pppoe-client is up

insert inside a dstnat in firewall nat

my proplem is how to get the local-address from the pppoe-client

muhanadali

please anyone can help me
i need a script that check the local-address of pppoe-client and go to the firewall mangle and add the local-address to src-nat number 0 in dst-address

muhanadali

this code if i use an ip from my database it's don't working if i use any ip like $ip = "192.1.1.2" it's working i use php 5.5 $sql = mysqli_select($link, "Select ip from rm_ap") while ($row = $sql->fetch_array()) { $mask_mac=false; //Use to mask MAC adress (true / false ); $ip =...

muhanadali

Then why are you trying to run SQL statements?
Can you reset with the option "No Default Configuration"?
Can you post the contents of /file (/file print or screenshot)?

it's showing automatic i don't know why ??
i reset but it's same proplem

muhanadali

Sure you want to you use your switch as database server?

no i just add a bridge
and add port 7 and 8 to the bridge

i reset configure but it's same proplem
it's like a disk faliture

muhanadali

Log says your disk drive is full. You have to do something about it.

i reset configure and same proplem
it's just like a disk failure

muhanadali

tried to update the device but every time it gives me this error and it does not update the device

CRS 112

muhanadali

with the latest updates
the udp has 10x faster
but the tcp It remained like it is why ?? and why the udp get faster ??

server = ccr1009

muhanadali

The mikrotik dhcp distributes random IP, how can it be forced to distribute IP sequentially like
1.1.1.254
1.1.1.253
1.1.1.252

not like
1.1.1.254
1.1.1.200
1.1.1.25

muhanadali

support ccq in oid please /interface wireless registration-table print oid signal-strength=.1.3.6.1.4.1.14988.1.1.1.2.1.3.180.251.228.54.139.100.58 tx-signal-strength=.1.3.6.1.4.1.14988.1.1.1.2.1.19.180.251.228.54.139.100.58 tx-bytes=.1.3.6.1.4.1.14988.1.1.1.2.1.4.180.251.228.54.139.100.58 rx-bytes=...

muhanadali

Is this on Amazon AWS? If not, why are you using their IP addresses?

it's private ip , so why don't use

muhanadali

why u run ISP without knowing

I have enough knowledge, but every person may fall into the simplest problems and cannot solve them without help. If you are able to help me, thank you very much.

muhanadali

why the dhcp give same address to active user ppp ??? i check everything But I couldn't solve the problem
SERVER : 1100AHX2 (6.47.4)
I use Radius

muhanadali

the antenna 2.4Ghz Could it's work with 5Ghz And vice versa ?? and why ??

muhanadali

I have Metal 2.4Ghz and RB912 5Ghz
Can i make mesh between metal and Rb912 ??

muhanadali

https://help.mikrotik.com/docs/display/ROS/ROSv7+Basic+Routing+Examples I did not understand anything from the post , The explanation does not suffice for the purpose and I recommend to amend it ---------------------------------------------------- i have pppoe-out 1 , pppoe-out 2 2 PC PC 1 (192.168...

muhanadali

I recommend using x86 to run RouterOS in a virtual environment, because in CHR mode RouterOS supports more memory (it is 64bit)

you mean the proplem because the system use 32bit but CHR running in 64Bit

muhanadali

Support Memory up to 16GB In RouterOS V6 like RouterOS V7

RouterOS V7
Total Memory 7.7GB

RouterOS V6
Total Memory 1784MB

muhanadali

Support Memory up to 16GB like RouterOS V7

muhanadali

Mark Routing & IP Route in RouterOS V6 it's simple and better than RouterOS V7

Please return it like it was in the previous version, it is simpler and easier
Now it is complicated and difficult

muhanadali

/ip firewall mangle add action=mark-routing chain=prerouting new-routing-mark=36 passthrough=no src-address=14.14.14.23 add action=mark-routing chain=prerouting new-routing-mark=35 passthrough=no src-address=14.14.14.24 /ip route add distance=1 gateway=pppoe-out1 routing-mark=36 add distance=1 gatew...

muhanadali

what you connecting?
what type of gadgets?

RB 912
Frequency 5515
Mode : Superchannel

muhanadali

why CAPsMAN doesn't support superchannel ?

muhanadali

any feature to run cloudflare warp on mikrotik ??

muhanadali

I have these openvpn config , i want to run it on mikrotik ovpn-client ??? ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ client d...

muhanadali

Which kind of ISP counts number of connections and based on that limits the service or even denies it? What would happen if you had one computer which is connected to the internet through this ISP? When you open Chrome from browsing, in a second you'll have more than one connection. So what is the ...

muhanadali

You can run only one connection with vpn to somewhere outside and let all those hidden connections to flow thru it into Internet from the other side...

How ??
The vpn will remove GGC and FNA with CDN , I need the cdn because the internet in my country is so slowly i'ts 0.2 Mbps

muhanadali

You want to limit number of connections per client? Run this command from terminal, it will add firewall rule to limit number of connections to 50 per each client IP on subnet 192.168.88.0/24 /ip firewall filter add action=drop chain=forward comment=\ "Limit number of connections to 50 for 192...

muhanadali

Moved to begginer basic... Anyway its quite impossible to understand what you want to help with. I want to reduce the number of connections shown inside the server In the country in which I live, load balance is prohibited for us The company that supplied the Internet measures the number of connect...

muhanadali

Wrong place for posting.

Before asking community for time to help you, please take some time and check out how forum works
and where to post question.

This helps everybody and finally also serves your demand best...

Sorry I'm new member where can i post this ??

muhanadali

I want to reduce the number of connections shown inside the server like below in the picture In the country in which I live, load balance is prohibited for us The company that supplied the Internet measures the number of connections and then turns off the line because the employees working in the co...

Search found 52 matches