Is anybody using IPv6 with Wireguard and VRFs successfully? I have my Wireguard interface slaved to a VRF. IPv4 traffic works just fine, but IPv6 doesn't work at all. When I try to ping the other side of the WG tunnel from the Mikrotik router, I get a no route to host. I have tried configuring a /12...

The issue of BGP routes getting installed in the wrong VRF is still there with 7.2rc3.
Can somebody from Mikrotik at least take a look at the support ticket (SUP-69254) and let me know if you need any more info?

I reported the same issue of BGP routes getting installed into the wrong VRF about a month ago in SUP-69254 and haven't heard anything from Mikrotik so far.

I am currently experiencing an issue with BGP and VRFs on a CRS309. I added a BGP peer and set the routing-table and vrf to the desired VRF: [admin@CRS309] > /routing/bgp/connection/export verbose # dec/15/2021 17:14:03 by RouterOS 7.1 # software id = 7ZTA-K828 # # model = CRS309-1G-8S+ # serial num...

So an update on this: I did the same setup on Linux and got the issue of being able to reach other addresses not belonging to the VRF but on the same host. Then after checking "ip ru li", a sudden realization came: # ip ru li 0: from all lookup local 1000: from all lookup [l3mdev-table] 32...

Hello guys, I am trying to setup a VRF on my RB750gr3 (7.1beta6) to isolate tunneled traffic from the underlay of the tunnel. What I did so far is: /ip vrf add list=VRF name=vrf /interface list add name=WAN add name=VRF /interface list member add interface=vlan178 list=WAN add interface=vlan10 list=...