Yep, looks like CAPsMAN is broken in v7.11 I have the same issue on a CCR1036-12G-4S. CAPsMAN basically becomes unresponsive and I notice also that the VLAN's on my bridge interface also have no status i.e. no R (Running) status. Are you guys using "normal" capsman or wifiwave2? I've wifi...

Yep, looks like CAPsMAN is broken in v7.11 I have the same issue on a CCR1036-12G-4S. CAPsMAN basically becomes unresponsive and I notice also that the VLAN's on my bridge interface also have no status i.e. no R (Running) status. I have CCR1009-7G-1C-1S+ go crazy with console crashes, script errors ...

I've done a bit more troubleshooting. It would seem that the UPS USB crashes the CCR1036's USB port. If I plug in a USB stick it registers on the resources/usb .. If I then unplug it and connect the UPS USB it does not register the usbhid. If I then try and put the usbstick back in the CCR it does n...

Same issue for me on a CCR1036 running 7.8, even tried 7.10.2 and same issue.

I am using a PowerShield Commander UPS and works fine with apcupsd on redhat.

On CCR1036 there is no usbhid device.

It's still happening on 7.3 but now it recovers a few hours later with no intervention... so still an issue but hard to replicate and with 7.3 it lasts 4-5hours before it comes good again.

I have raised a support ticket..

I had this happen just now.. CCR1036-12G running RouterOs 7.2.2 It could not ping anything but I could telnet to ports on the destinations.. i.e. ping 192.168.1.1 failed with timeout, but telnet 192.168.1.1 I could login to the router. This was not just for one device it was for all devices on the n...

v7.1.3 appears to have resolved the issue.

I have an issue with L2TP and IPsec using preshared secret. I am connecting to a CHR running 7.1 with ~100 l2tp ipsec VPN's connected to it. I am connecting from a CCR1036-12G-4S. RouterOS v6.48.6(tile) or 6.49.2(tile) the l2tp ipsec VPN works fine. Upgrade to 7.1(tile) and the l2tp no longer works....