`Doesn't seem to do very much, at least not when added to a BGP Connection.
bgp multipath / add-path is not implemented.
`I would use 'dst-address~":5060$"' form: it doesn't touch ports 50600-50609 and it should be a bit faster
`To keep you guys busy with speculations
Boy, I hope not. V7 is clearly a ways off.I suspect a reply like "it will all be fixed in version 7".
Ah! Got it. So the problem might manifest itself on any multicore MikroTik?RB450G has only one CPU core, but RB850Gx2 has two CPU cores.
Problem with IPTV is "reordering packets".
Supports PCIe module with AHCI command-set or NVMe (or both)?You can see in the brochure, that it only supports PCIe modules in this slot:
2x M.2 slots with x4 PCIE 2.0, Key-M, module size support: 2242,2260,2280
I don't think anybody -- even those with the problem -- have reported issues with the SFP port. Â The problem has only manifested itself between copper WAN and LAN.I have 200 Mbit/s speed over fiber optic.
Very interesting! Is there a reason that you have not done a PPC build of The Dude? There are PPC RouterBoards that outclass the RB3011.*) arm - added Dude server support;
You can do that, or you can hook a serial cable up to it and instruct the bootloader to boot via network that way.Looking at the manual, it shows a button on the board. Does that mean I need to remove the cover of the RB1100AHx2 to access the button?
Google Images is your friend. Defective capacitors will have the top crown bulging out and likely be leaking something, or showing some corrosion on the top.Tried with 2 different power supply same results. Any idea how to look for bad caps?
Wait...say what? Pretty sure Tile architecture is not related to MIPS64. But if I'm wrong, [citation needed]....and about 2.5x-3x faster than any kind of MIPS64 chips(including Cavium, Tilera and etc)
My guess was within the ballpark, then.This is the CPU that we will use for RB3011:
http://www.anandtech.com/show/7526/qual ... nd-ipq8062
Excellent; thanks for the update!mistake in the render. there is a USB on the hAP ac
Yes. I have a ticket open with them, and I hear from them every once in a while about it, but it apparently is not an easy problem to solve (like pretty much every other MetaROUTER bug...grrr).Is this something Mikrotik is aware of and working on?
In OP's defense, CCR1009 != CCR1016. A 1009 may not have fit the requirements.CCR with pasive cooling is not suitable for you?
http://routerboard.com/CCR1009-8G-1S-1SplusPC
So true.This is how they know that - they got burned before.
*sigh*So there is no way to force running both at the same time in RouterOS?
You are wrong; it never showed anything in v5, either, because this model has no health sensors. You are confusing this device with some other model:then why in previous versions like v5 show health status in this device ??!!