At this point, you should move this part of the discussion to the WiFi channel. On topic for 7.12rc1 though, was your problem resolved by using the guidance from the post by Ftoms in MT support?If we were to wind back a bit regarding tagging/vlan and go back to documented basics
Yeah, does this do what I think it does???wifiwave2 - use CAPsMAN's "datapath.vlan-id" on CAP for bridge port "pvid"; << Thank you!
I like the inline comments in WebFig. It's saving me a lot of time scrolling. I ask that Mikrotik don't change this back.PLEASE Mikrotik staff that reads this thread ... reconsider the inline comments on the webfig and also the 'centering of everything'
Message me directly and I'll see if I can help you. I have VLANs with 7.9 and 7.10beta5 working.Nope, even disabling WPA3-PSK and Disable PMKID did not help - wlan devices unable to connect and obtain IP from DHCP (using vlans). Still the same issue...
I've confirmed that DHCP is working for all my devices on 7.9 stable. This includes the Google Nest Doorbell.Anybody know if the DHCP server on 7.9 stable is borking stuff like Google Nest Doorbell DHCP requests?
And large houses. Don't make me feel bad for having 4 x cAP ac!cAP is not really intended as the "only router in your house", but sure, you can use it for that.
But normally I would suggest hAP in such a case. cAP is more for large networks and CAPsMAN.
Yeah no problem mate, curious how you decide to go. Mikrotik forums can be a lot like the old XKCD comic "Wisdom of the Ancients" https://xkcd.com/979/That makes a lot of sense. I'm going to give it a go and see what happens tonight when I'm home. Thank you for the info!!!
Yeah, my cAP ac units are nearly always ahead of my router but everything has been running 7.X. All devices are on 7.6 (stable) now.Out of interest, are you running v7.x on the cAP acs?
You should not default to a position of "MS is wrong, because MS" rather than considering that non-RFC compliant use of UDP and IP is the real problem.So MS upgrade 10 to 11. MT is in the wrong. Just.... Really. Use linux for all I care.
Hi mate, how are you getting that error in the pre-boot environment - USB-to-serial cable?My RB5009 routinely gets stuck on reboot, and I get this error:
upgrade status: failed, failed to download file 'routeros-arm-7.2.3.npk', no such file
I get that, but I'm trying to focus on the use of broadcast packets as a means of file transfer. For lab and home users,there needs to be a better option.I'm not even trying anymore with windows.
I have a dinosaur-old Dell laptop (2008) with Linux.
Works first time right each and every time.
No good for me; I use too many of my 1Gb/s ports. The CRS326 is perfect for my needs.I will prefer this one Ethernet/SFP+ (Combo Ports) CRS312-4C+8XG-RM
I don't know what "hilink" is.ur firmware is Hilink or no-hilink?
Thanks. I'm currently operating without fasttrack and the CPU hasn't spiked over 50% so far. At least that means I have a workaround.I'd ask mikrotik support directly, attach a supout on the email.
RouterOS 6.34.3 and firmware 3.24.Looks like...
Which RouterOS and firmware version is the CRS running?
Just send that for now, and try the interface queue trick as well, as mentioned above.Hello
i will post you /interface ethernet print when iam at home
and if then my configuration is wrong can you tell me or configured it for me the right way?
thanks in advance
should i post anything else?