if /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-pppoe=yes then have promlems: 1. dont work simple queues (upload) 2. and then other mikrotik connect to this mikrotik by pppoe then have 0.1 mbit/s download speed, and unlocked speed upload (promlem 1) if /interface bridge se...

if /interface bridge settings set use-ip-firewall=yes use-ip-firewall-for-pppoe=yes then have promlems: 1. dont work simple queues (upload) 2. and then other mikrotik connect to this mikrotik by pppoe then have 0.1 mbit/s download speed, and unlocked speed upload (promlem 1) if /interface bridge set...

and when to add hw to ccr

it's traffic in a problematic vlan, everything is very trite.
cpu usage less 10%

это трафик в проблемном влане, все очень банально.

I have the same problems even on CCR1072 6.41.3

Имею туже проблемы даже на CCR1072 6.41.3

OK, just an example. It means you do not need it. Is the splitting the log files by topics usable for you or not?

yes

OK, just an example. It means you do not need it. Is the splitting the log files by topics usable for you or not?

yes

What's new in 6.41rc50 (2017-Oct-30 10:13):

*) radius - limited RADIUS timeout maximum value to 3 seconds;

a very bad idea, this field generally needs to remove the limits, so that I myself can set the desired value, for example, even 15-20 seconds

Имеем следующую ситуацию: есть роутер который принимает в бридже несколько вланов, транкует их между 2-я интерфесами SFP+ один из них vlan для iptv где по udp происходит передача видео потоков. если пустить данный vlan не через mikrotik то все работает хорошо. Но если этот vlan проходи через CCR1036...

There is no boot up logging, only common ros logging that can be split into different files by topics, not by any of described states. Actually there are no such states. Ros doesn't go down, you just switch off the power, so there is nothing to log...

it was example, no more.

in old version dude 4.0.3 was good system split log in custom file...
why no make similarly system, moreover such a system have been previously?

how do I split the log files to some logs do not fall into other file logs eg syslog (514 port) log when the device goes into state up log when the device goes into state down ie there are 3 log files and need to log in these files do not overlap как мне разделить файлы логов чтобы одни логи не попа...