Noted!

I think system > license is kinda broken in chr 7.15rc1... console prints it out okay
chr-715rc1-system-license-print.png

The issue with SSH, WinBox connection to CHR has been reproduced and will be fixed in upcoming RC version.

Email to support@mikrotik.com

Cloud/DDNS is back.

We are working to resolve this issue!

holvoetn please create and send to support@mikrotik.com supout.rif file.

Upgraded rb5009 / AX2 / AX3 to 7.15b6

I see this in AX3 upon inspection of logs (same on AX2 but not for RB5009)

What script ?

Try "/certificate crl flush"
If CRL still does not update, create and send a new supout.rif file to support@mikrotik.com

Still having issues with CRL

See attached

log.txt
supout.rif.txt

TIA

Ps. DoH doesnot work when "verify DoH certificate" is unchecked!

Do you have static DNS record that points to used DOH server DNS name?
What error message do you get in LOG?

Unfortunately, until 7.11, use-crl setting did not work properly. We fixed CRL check in 7.11 thus, routers with half-certificate chains that worked in the past by mistake will not work anymore until the full certificate chain is not imported.

If crl-use is yes, RouterOS will check CRL for each certificate in a certificate chain, therefore, an entire certificate chain should be installed into a device - starting from Root CA, intermediate CA (if there are such), and certificate that is used for specific service. For example, Google DoH fu...

Until 7.11rc1, CRL verification did not work correctly. If use-crl is set to yes, RouterOS will check CRL for each certificate in a certificate chain, therefore, an entire certificate chain should be installed into a device - starting from Root CA, intermediate CA (if there are such), and server cer...

Please create and send a supout.rif file to support@mikrotik.com Hi rc1 Cloudflare-dns.com DOH certificate no longer works. I deleted it and imported it again, but it didn't help. DoH server connection error: SSL: ssl: CRL not found (6) DoH server connection error: SSL: ssl: CRL not found (6) [ignor...

The issue has been identified, and we look forward to fixing it on upcoming RouterOS versions

Update a device to the latest RouterOS version, after update run command "/system health detect-fans". If the issue persists, send supout.rif file to support@mikrotik.com

Please send to support@mikrotik.com a certificate you are trying to import.

Sorry about the confusion. In Winbox is visible naming from RouterOS v6, where TLS-related settings are named differently than in v7. RouterOS v6 => v7: "Start TLS" => "TLS" "tls only" => "yes" "yes" => "starttls" The issue is registered.

Replace "ov" with $theMonth

elbob2002, qatar2022 - Please send supout.rif files to support@mikrotik.com from your devices and shortly describe your setup, specify connected devices.

Hello, blackangel1

Try apply following configuration to port where the UF-RJ45-1G module is plugged - disabled auto-negotiation, forced speed to 1G, and enabled full-duplex. Module re-plug may be needed.

It is not a hAP AC2, it's a hAP ac lite or hAP ac lite TC
https://mikrotik.com/product/RB952Ui-5ac2nD
https://mikrotik.com/product/RB952Ui-5ac2nD-TC
Both of them have five 10/100 Ethernet ports .

By the name/product code - /system routerboard print
RBOmniTikU-5HnD - OmniTIK 5 whitout PoE
RBOmniTikUPA-5HnD - OmniTIK 5 PoE with PoE
RBOmniTikG-5HacD - OmniTIK 5 ac whitout PoE
RBOmniTikPG-5HacD OmniTIK 5 PoE ac with PoE

intensex
Most likely it is a hardware related problem, we suggest to contact a distributor/reseller you bought a device from and ask for RMA.

If you have not changed SIM slot settings into RouterOS, then ensure that SIM card is inserted into slot number 3.

LTE package is required only for old SXT LTE (RBSXTLTE3-7).
What do you mean with "can't get the LTE to work"?
You are unable to get an active LTE connection? Does LTE interface show up into WinBox?

I would say that the product is the same but with a few improvements. The serial port is still there but style is changed from RS232 to RJ45 style, also in the previous revision there were no RAM slots, voltage monitor is replaced to PSU state (if the state is "fail", PSU is unplugged from...

itscmo, check CCRs revision under /system routerboard print
You have two different revision routers, the second one is the newest revision 2 device.

you will need active cooling, so buy a model with active cooling (RB1100AHx4 would be my suggestion).

Be careful choosing device, both RB1100AHx4 models have passive cooling!

Try to update your device to the latest RouterOS Testing version (6.44beta54).
If after update fault LED still turns on, execute this command: "/system health detect-fans"

Does system health report that all four fans works?
Do fans physically spins?