Hello,
My current ISP is delivering 2.5 symmetrical to my ONT. There is a link which is tested with a compatible 2.5gb Ethernet compatible device. Upon plugging in the RB5009, I am having a network cap of 1400mb/s down and about 1.5-2gb up. I have factory reset and factory flashed the device to see if I had a bad configuration, that didn't help.
I've tested different ports. I.e sfp+ to rj45 module (this was tested prior to the rb5009 being installed and worked)
I've used the 2.5gb as the connection point from the ONT.
At the moment I have ONT > RB5009 with a RJ45 cat cable link. Tested the cable as well to insure no integrity loss.
If anyone has any tips or suggestions that would be very helpful.