rx pauses on which interface?i see RX pauses only. If i turn off the FC and turn on the HWO, i see RX overflows on uplink
This means the only allowed ips are 0.0.0.0-0.0.0.255AllowedIPs= 0.0.0.0/24
Excellent resource. Thank you for your contribution.If Viber is the problem, do not use generic title...
if(CountRegisteredClientsTable() < 210, "", "Number of WIFI Clients above 210! ")
If you say so. Good luckIt seems some people connect their Mikrotik routers via this configurations that I don't access to them.
True, but it can be spun up on, and ran off of almost any linux box. but then your adding complexity, cost and reliability issues.zerotier is not available on all models and thus a cautionary offering.
/ip ospf area range
Your the only guy I know that has fit 400 access points in a subnet with 255 ip's. Absolutely Amazing! What's your secret?I have 400 APs that need to be connected to the RADIUS SERVER, do you want me to input the IP ADDRESS one by one?
/ip firewall connection tracking enabled no
What is that process?But when I do the similar process on a Mac
Redistribution into an NSSA area creates a special type of link-state advertisement (LSA) known as type 7, which can only exist in an NSSA area.
It's only a security risk if you configure it like a security risk
Is it only me who considers this to be a potential security risk, exposing some configuration of the router to every device on the network?
7.1.1 RB4011well, it's definitely not Zerotier then. what's your RouterOS?
My test topology:
PC -->Microtik<-zerotier->opnsense in cloud-->internet
results: (maxed my upload speed)
Thanks, no auth here.Check if you use authentication ..OSPF 100% broken after update.
Not seeing neighbors anymore.
In my case this was the problem, neighbor is ros6
I just remove it .. for me this was not requirements (legacy config) so i did not do future tests
I know your trying to redeem yourself, but your just not there. Maybe next time.Well the ref quoted does say "your issue" which is singular, not my fault you are illiterate and provided multiple issues on one ticket.
As you can see in the picture of the ticket, all the issue's started in the forums and went unanswered so they got upgraded to official support.Mention it here. Start a new thread.
Most likely someone encountered the issue as well.
Maybe some even know a work around already...
I have a rb4011 with ospf and ospfv3 running with no hickups.Are you stuck at ExStart on the state? I had this issue and did a rollback to get it working again. Created supout and reported it today.
I think OSPF still needs some love to get to a good state.
add action=fasttrack-connection chain=forward comment="fasttrack" connection-state=established,related
That works fine... That's the page it brings me to after webfig error's out when I first login. Sorry if I wasn't clear on that.Try this :
No, that is not the same thing.Same feature in RouterOS , no ?has nothing to do with the question at hand
Thanks but that has nothing to do with the question at hand, so not sure why you would post.