Community discussions

MikroTik App

Search found 4 matches

by dannyyy
Sun Dec 10, 2023 11:18 am
Forum: Beginner Basics
Topic: Blocking DNS traffic
Replies: 6
Views: 1995

Re: Blocking DNS traffic

Thanks @vingjfg. The dumb second rule. To all the others, as mentioned in my previous post, these rules are far from production. Why in gods earth would you allow port 80 to the router from the internet side. I would guess that using ether1 probably wont work as traffic is actually via the interface...
by dannyyy
Sat Dec 09, 2023 11:06 pm
Forum: Beginner Basics
Topic: Blocking DNS traffic
Replies: 6
Views: 1995

Re: Blocking DNS traffic

Please ignore the entire Wiregurd stuff, it's not relevant for the question I have. The current rules are more of a trial and error, not intended to keep them this way :) # 2023-12-09 20:57:04 by RouterOS 7.12.1 # software id = MKI3-RTA5 # # model = RB924i-2nD-BT5&BG77 # serial number = XXX /int...
by dannyyy
Sat Dec 09, 2023 10:27 pm
Forum: Beginner Basics
Topic: Blocking DNS traffic
Replies: 6
Views: 1995

Blocking DNS traffic

Hi, Looks like I'm having an absolute beginner question. On other systems than MikroTik this question is easy to be answered. I have a cellular MikroTik IoT router (KNOT), that uses LTE-M / NB-IoT. One of the clients is flooding the network with dozens of DNS requests. Due to the limited bandwidth, ...
by dannyyy
Fri Jan 20, 2023 9:45 pm
Forum: RouterBOARD hardware
Topic: KNOT dead after removing interface
Replies: 0
Views: 912

KNOT dead after removing interface

Hi, I bought a new KNOT and was able to connect through WiFi and ETH2. WiFi was only able to work in AP mode and I had my issues using it in station mode. The PPP client (LTE-M) was actually fully unable to work properly. I guess "usb2" is the right one because there is no "modem"...