Community discussions

MikroTik App

Search found 606 matches

by biomesh
Wed May 08, 2024 2:19 pm
Forum: General
Topic: CRS326 high cpu [SOLVED]
Replies: 8
Views: 3919

Re: CRS326 high cpu [SOLVED]

Some of the lower end mips cpus on switches will have this issue - the arm based devices don't.

Just something to be aware of when you are looking at hardware options.
by biomesh
Tue May 07, 2024 10:52 pm
Forum: General
Topic: CRS326 high cpu [SOLVED]
Replies: 8
Views: 3919

Re: CRS326 high cpu [SOLVED]

My guess is on having BFD enabled. If using winbox, close all windows and open a terminal and see if the /tool/profile output is any different. hi bfd works with routing protocols ? we not running routing protocols on this switch. tools profile in terminal via ssh and no winbox open still shows hig...
by biomesh
Tue May 07, 2024 4:59 pm
Forum: General
Topic: CRS326 high cpu [SOLVED]
Replies: 8
Views: 3919

Re: CRS326 high cpu [SOLVED]

My guess is on having BFD enabled.

If using winbox, close all windows and open a terminal and see if the /tool/profile output is any different.
by biomesh
Tue May 07, 2024 12:27 am
Forum: Announcements
Topic: v7.15rc [testing] is released!
Replies: 310
Views: 81349

Re: v7.15rc [testing] is released!

What is "supported" - i.e. software updates for security fixes or software updates for new features and security fixes?
by biomesh
Sun Apr 21, 2024 8:03 pm
Forum: RouterBOARD hardware
Topic: CRS328-24P-4S+RM
Replies: 3
Views: 494

Re: CRS328-24P-4S+RM

A CRS318-16P+2S-IN or a CRS310-8P+2S-IN would be awesome - as long as they have more than 16MB flash.
by biomesh
Wed Apr 17, 2024 2:08 pm
Forum: General
Topic: Wireguard IPv6 and Subnets
Replies: 5
Views: 677

Re: Wireguard IPv6 and Subnets

It won't be automatic address assignment, but this can be done. Add an address to the wireguard interface on the router i.e fd00:12::1/64 Add and address to the wireguard client (remote device) and on the peer (allowed addresses) i e fd00:12::2/128 If you have your ipv6 routes configured correctly o...
by biomesh
Mon Apr 01, 2024 5:20 pm
Forum: Announcements
Topic: v7.14.3 [stable] is released!
Replies: 662
Views: 194858

Re: v7.14.2 [stable] is released!

Could the "memory leak" be due to 0 disk space available?
by biomesh
Sun Mar 03, 2024 5:04 am
Forum: General
Topic: RB5009UPr+S+IN power problems?
Replies: 15
Views: 2057

Re: RB5009UPr+S+IN power problems?

I have one that powers an AP (grandstream gwn7664) and a sip phone. The AP pulls about 8-11W and the phone around 3W during normal operation. My other 5 APs(same as above) are powered by a crs318 (netpower 16).

I have not seen any reboot issues.
by biomesh
Fri Mar 01, 2024 1:29 pm
Forum: Announcements
Topic: v7.14.3 [stable] is released!
Replies: 662
Views: 194858

Re: v7.14 [stable] is released!

Upgraded ccr2004-16g-2s+, rb5009, crs318, crs317, cap ac, crs112 and chr with no real issue. This is from a mixture of 7.13 and 7.14rc versions. I did see the odd firmware version text display issue I saw with a previous rc to release version on the ccr, but it just seems to be cosmetic. Everything ...
by biomesh
Sun Feb 25, 2024 8:57 pm
Forum: General
Topic: Single bridge on multiple switches [SOLVED]
Replies: 2
Views: 607

Re: Single bridge on multiple switches [SOLVED]

Take a look at this thread

viewtopic.php?t=203659

Different options depending on use case
by biomesh
Sun Feb 25, 2024 8:06 pm
Forum: Useful user articles
Topic: IPv6 with Xfinity
Replies: 2
Views: 424

Re: IPv6 with Xfinity

The configuration depends on if you have mid split enabled or not. It looks like you do not have mid split enabled yet (yours looks like my old config for the default route). Once mid split was enabled in my subdivision, I had to set the default gateway to the interface name. This is most likely tie...
by biomesh
Thu Feb 22, 2024 3:11 pm
Forum: Containers
Topic: CCR1xxx with containers
Replies: 35
Views: 2467

Re: CCR1xxx with containers

All of the CCR1xxx series have been discontinued. Since they are not an active product any more, I doubt any development time will be spent on new features for that platform. They will be supported (according to Mikrotik) for at least 5 years from date of purchase. These updates do not guarantee new...
by biomesh
Thu Feb 08, 2024 5:02 am
Forum: General
Topic: CRS310-8G-2S+-IN expected internet performance?
Replies: 6
Views: 743

Re: CRS310-8G-2S+-IN expected internet performance?

I will! What do you recommend that can get me 2 gigabit internet performance without a doubt? I got recommendations from the one poster in the other less used sub forum but am looking for confirmation or other suggestions. Also, the CRS310 can work as a managed switch at 10 gigabit throughput, righ...
by biomesh
Thu Feb 08, 2024 1:20 am
Forum: General
Topic: CRS310-8G-2S+-IN expected internet performance?
Replies: 6
Views: 743

Re: CRS310-8G-2S+-IN expected internet performance?

Looks like you got the same answer as before(by different people).

viewtopic.php?t=204099

I would suggest making sure to do some research before buying your next piece of hardware.
by biomesh
Sun Feb 04, 2024 4:04 am
Forum: RouterBOARD hardware
Topic: CRS310-8G-2S+-IN realistic WAN/Internet expected throughput?
Replies: 2
Views: 730

Re: CRS310-8G-2S+-IN realistic WAN/Internet expected throughput?

This is a switch with some routing capabilities. https://mikrotik.com/product/crs310_8g_2s_in#testresults The routing performance is on par with what you have seen. It supports some basic hardware offloading for routing, but not for nat/fasttrack. You should get a router to pair with your switch. An...
by biomesh
Fri Jan 26, 2024 8:41 pm
Forum: Beginner Basics
Topic: CCR2004-16G-2S multiple bridges or not?
Replies: 36
Views: 3200

Re: CCR2004-16G-2S multiple bridges or not?

For someone with a CCR2004-16G-2S+ and a single bridge between both switch chips and one of the SFP+ ports, the hardware offloading does work as long as the same vlan to vlan traffic is on the same switch chip. So the winner is mkx! :D inter-asic traffic is punted via CPU, stop purporting fake info...
by biomesh
Fri Jan 26, 2024 5:29 pm
Forum: Beginner Basics
Topic: CCR2004-16G-2S multiple bridges or not?
Replies: 36
Views: 3200

Re: CCR2004-16G-2S multiple bridges or not?

For someone with a CCR2004-16G-2S+ and a single bridge between both switch chips and one of the SFP+ ports, the hardware offloading does work as long as the same vlan to vlan traffic is on the same switch chip.

So the winner is mkx! :D
by biomesh
Sat Jan 13, 2024 3:40 pm
Forum: General
Topic: hEX PoE router configuration changes disappearing
Replies: 7
Views: 998

Re: hEX PoE router configuration changes disappearing

If safe mode is not enabled, it is usually due to low disk space on the device.
by biomesh
Thu Jan 11, 2024 3:26 pm
Forum: General
Topic: Forum broken?
Replies: 31
Views: 2619

Re: Forum broken?

I have had to refresh a few times for it to work. Perhaps a cdn or some other issue.
by biomesh
Tue Dec 19, 2023 2:12 pm
Forum: General
Topic: CCR2004 bridge performance
Replies: 5
Views: 950

Re: CCR2004 bridge performance

My guess is the crap ton of firewall rules you have. You are probably hitting multiple forward rules on the intra vlan traffic. You should check your rules and add criteria for in-interface={your-wan-interface} where appropriate.
by biomesh
Fri Dec 15, 2023 4:51 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 271841

Re: v7.13 [stable] is released!

When updating the firmware on a CCR2004-16G-2S+ the "upgrade firmware" string is different than the version shown under "current firmware" once applied. It looks like there is an extra carriage return in the string - so there always seems to be an update available (even if it has...
by biomesh
Wed Dec 06, 2023 10:20 pm
Forum: Beginner Basics
Topic: L009UiGS-2HaxD-IN fast enough for 1GBIT Internet?
Replies: 10
Views: 3526

Re: L009UiGS-2HaxD-IN fast enough for 1GBIT Internet?

That same question could be said about an RB450G which definitely could not route 1Gbit/s. Gigabit ports are needed to route more than 100MB/s so while the port can negotiate at 1Gbit, routing speed is another matter.
by biomesh
Tue Dec 05, 2023 2:20 pm
Forum: Wireless Networking
Topic: CAPsMAN wiht more than 250+ AP
Replies: 2
Views: 1493

Re: CAPsMAN wiht more than 250+ AP

Almost sounds like there is an issue with RSTP unless you have logs from the CCR to show otherwise.

Having a secondary capsman controller is always a good idea (is much easier to implement if just using local forwarding).

Posting your config(export) and version info would be useful as well.
by biomesh
Mon Dec 04, 2023 4:46 pm
Forum: Beginner Basics
Topic: L009UiGS-2HaxD-IN fast enough for 1GBIT Internet?
Replies: 10
Views: 3526

Re: L009UiGS-2HaxD-IN fast enough for 1GBIT Internet?

The L009 is a replacement for the RB2011, not the RB4011. If you look at the routing specs, what you see is what is expected. You can post your config to have someone look at it and see if there are any tweaks, but I doubt it will perform as well as the 4011. You should keep the 4011 and use the L00...
by biomesh
Sun Dec 03, 2023 2:29 pm
Forum: Wireless Networking
Topic: Wi-Fi 6E devices for an new project
Replies: 10
Views: 4888

Re: Wi-Fi 6E devices for an new project

There is no current wifi 6E device from Mikrotik. You will need to pick from the slim choices from another vendor.
by biomesh
Tue Nov 28, 2023 3:22 pm
Forum: Beginner Basics
Topic: Is my CRS310 DOA?
Replies: 4
Views: 1622

Re: Is my CRS310 DOA?

This has happened before on other switches - Mikrotik just needs to remove the option for swos for that switch in an updated version as swos is not a supported option for that switch.

https://mikrotik.com/product/crs310_8g_2s_in
by biomesh
Mon Nov 13, 2023 11:41 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 95025

Re: v7.13beta [testing] is released!

Opened SUP-134289 for an issue on CCR2004-16G-2S+ where I could not communicate with any device on the gigabit ports (this includes the CCR2004 and other devices on the same vlan on different devices crs317 etc)

Revert to 7.12 and it works correctly.
by biomesh
Fri Nov 10, 2023 2:30 pm
Forum: General
Topic: crs309 poor 10gb performance
Replies: 28
Views: 2785

Re: crs309 poor 10gb performance

Have you run an iperf between two devices on the same vlan? (pc and nas if possible)
by biomesh
Fri Nov 10, 2023 12:07 am
Forum: General
Topic: crs309 poor 10gb performance
Replies: 28
Views: 2785

Re: crs309 poor 10gb performance

If the 10GBit connection is saturating the link it can cause lots of retries as 10gbit worth of data won't make it through a 2.5 gbit ink. By having the switch limit it on the interface side, it can help mitigate the retries. I got around this by just moving everything to 10Gbit - problem solved :)
by biomesh
Thu Nov 09, 2023 5:27 pm
Forum: General
Topic: crs309 poor 10gb performance
Replies: 28
Views: 2785

Re: crs309 poor 10gb performance

The best way to test is using iperf on both ends. As long as the machines on both ends are powerful enough to generate/receive 10Gbit worth of traffic, you won't hit any other bottlenecks like disk IO etc.
by biomesh
Thu Nov 09, 2023 5:12 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 97206

Re: v7.12 [stable] is released!

This is actually already fixed in 7.13 which is coming soon. Deprecate message will not be sent if actual prefix is re-used.
Thanks - I have a workaround (mentioned before), so I'm good for now.
by biomesh
Thu Nov 09, 2023 4:54 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 97206

Re: v7.12 [stable] is released!

Why is that a problem? That is intended behaviour at the moment. Well you get a non working config: prefix 2601:2c3:xxxx:dc32::/64 { AdvValidLifetime 7200; AdvPreferredLifetime 7200; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition prefix 2601:2c3:xxxx:dc32::/64 { Ad...
by biomesh
Thu Nov 09, 2023 4:51 pm
Forum: General
Topic: crs309 poor 10gb performance
Replies: 28
Views: 2785

Re: crs309 poor 10gb performance

Does it work correctly if you use 10Gbit on both connections? (or do you only have asymmetric connections). Sometimes flow control helps but you might need to go to the switch port settings and set an ingress/egress rate limit to see if you can get closer to the actual hardware line rate. One way to...
by biomesh
Thu Nov 09, 2023 4:35 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 97206

Re: v7.12 [stable] is released!

Opened SUP-133893 where RA deprecate messages for an active RA are sent at the same time as the active RA.

Workaround: toggle "use interface duid" to temporarily get a new PD then it reverts back to the actual PD and the RA will be correct.
by biomesh
Mon Oct 16, 2023 2:24 pm
Forum: RouterBOARD hardware
Topic: cAP ax vs hAP ax² as an access point
Replies: 8
Views: 3507

Re: cAP ax vs hAP ax² as an access point

For my opinion of why it costs more:

More overall materials needed (product, box, shipping costs, etc)
More complicated antenna design means a more complicated build (albiet slight increase)
Not made in scale as compared to the ax2 thus costs more (just a guess)
by biomesh
Sat Oct 14, 2023 3:22 pm
Forum: Wireless Networking
Topic: CAPsMAN with WifiWave2
Replies: 32
Views: 14840

Re: CAPsMAN with WifiWave2

I'd say that legacy capsman controller on a crs326 depends on use case. Do you use capsman forwarding? If yes, then the crs326 would not be a good choice. Otherwise the crs326 would be primarily for provisioning and should work fine. I had multiple capsman controllers and one was a crs326 and it wor...
by biomesh
Tue Oct 03, 2023 1:53 pm
Forum: General
Topic: CRS354-48G-4S+2Q+ and bonding = high CPU and limited thoughput
Replies: 7
Views: 1129

Re: CRS354-48G-4S+2Q+ and bonding = high CPU and limited thoughput

You don't specify a bonding mode, and the old docs state that the default bonding mode is not one of the supported bonding modes. (the current docs don't state the default mode). I would set it to 802.3ad or balance-xor manually (whatever the qnap supports) and then monitor the bond to see the statu...
by biomesh
Tue Oct 03, 2023 7:08 am
Forum: General
Topic: CRS354-48G-4S+2Q+ and bonding = high CPU and limited thoughput
Replies: 7
Views: 1129

Re: CRS354-48G-4S+2Q+ and bonding = high CPU and limited thoughput

Sounds almost like the bond is not being hardware offloaded. Can you export your config so we know what your config is?
by biomesh
Sat Sep 30, 2023 3:27 pm
Forum: RouterBOARD hardware
Topic: Router for 2.5 G / 500 connections
Replies: 3
Views: 2916

Re: Router for 2.5 G / 500 connections

Definitely not the crs as that is a switch with basic routing capabilities. If you need 2 sfp+ ports you are looking at a ccr2004 or a ccr2116 to start. I don't do anything with pppoe, so someone else will have to provide their feedback on that. Just remember: good, fast, and cheap - pick any two.
by biomesh
Tue Sep 19, 2023 4:13 pm
Forum: General
Topic: Winbox via IPv6 [SOLVED]
Replies: 2
Views: 659

Re: Feature Request: Winbox via IPv6 [SOLVED]

Put the address in brackets:
[fd00:1234::4321]
by biomesh
Sun Sep 17, 2023 2:49 pm
Forum: General
Topic: Mikrotik SUCKS
Replies: 88
Views: 14256

Re: Mikrotik SUCKS

There are always positives and negatives with any solution. Mikrotik positives: relatively inexpensive, flexible, no ongoing licensing costs, support lifecycle is fairly long (hardware will work for a long time) Mikrotik negatives: Can be a steep learning curve compared to other vendors (changes on ...
by biomesh
Thu Sep 14, 2023 2:15 pm
Forum: Beginner Basics
Topic: CRS112-8P-4S High CPU usage, need your help and suggestion
Replies: 2
Views: 1303

Re: CRS112-8P-4S High CPU usage, need your help and suggestion

The device barely has enough power to display stats in winbox for interfaces. This is definitely a switch only - while it does have some router features available, the cpu (400MHz mipsbe) can't handle it.

Configured as just a managed switch, it works very well.
by biomesh
Mon Sep 11, 2023 2:27 pm
Forum: Announcements
Topic: Newsletter #114 | September 2023
Replies: 72
Views: 15886

Re: Newsletter #114 | September 2023

Can you guys clarify the use case of 2.5G ports but with PoE output? I thought this kind of switch was great for high end PC's, not for plugging in more routers? I have access points that are ax 4x4 that have both 1g and 2.5g ports that allow for poe in on both ports. I only have one drop run to ea...
by biomesh
Sat Sep 09, 2023 6:01 pm
Forum: Announcements
Topic: Newsletter #114 | September 2023
Replies: 72
Views: 15886

Re: Newsletter #114 | September 2023

The css610 outputs more power than that. I would hope the specs would take into account that devices with 2.5 gbe ports use more power.
by biomesh
Sat Sep 09, 2023 3:28 pm
Forum: Announcements
Topic: Newsletter #114 | September 2023
Replies: 72
Views: 15886

Re: Newsletter #114 | September 2023

I would buy at least two of the CRS310-8P+2S+IN if those were released.
by biomesh
Fri Sep 08, 2023 3:04 am
Forum: Beginner Basics
Topic: Mikrotik CRS112-8G-4S-IN
Replies: 2
Views: 1137

Re: Mikrotik CRS112-8G-4S-IN

Not sure if the iphone app has a 'discover' option, but if so, you should be able to connect via the mac address of the switch.
by biomesh
Fri Sep 08, 2023 1:42 am
Forum: General
Topic: 4/200+ dhcp leases are on the wrong bridge port
Replies: 2
Views: 1021

Re: 4/200+ dhcp leases are on the wrong bridge port

Without your layout it's hard to tell - I have a feeling that there is a vlan issue with your switch where sfpplus1 is connected to.

Like was mentioned before, there is no reason to put sfpplus1 into a bridge for one interface.
by biomesh
Thu Sep 07, 2023 5:43 am
Forum: RouterBOARD hardware
Topic: UK Power Supply for hAP AX3
Replies: 20
Views: 4892

Re: UK Power Supply for hAP AX3

If you think you need more power, just get a 24HPOW - it's 24V/2.5A. Most people will not max out the power of the device. There are other devices that also have a similar situation - hap ac2, rb951u, etc. There is a cost balance, especially on the lower end consumer devices (under $150 USD) vs the ...
by biomesh
Wed Sep 06, 2023 4:25 pm
Forum: General
Topic: HW3 CCR 2116 Problem
Replies: 9
Views: 1496

Re: HW3 CCR 2116 Problem

If you take sfp2 out of the bridge on the ccr2116 the issue should "disappear". This would prove the loop issue as well. By removing sfp2 out of the bridge you would also lose L3HW offloading, but the routing should work if you are using vlan interfaces and assign vlan100 to sfp2 (this wou...
by biomesh
Tue Sep 05, 2023 6:11 pm
Forum: Announcements
Topic: SwOS Lite version 2.17 released!
Replies: 20
Views: 104042

Re: SwOS Lite version 2.17 released!

The only reason I mentioned ROS is that is what I test on. I think the power/reboot functionality would have to do more with the hardware(and warm/hard reboot) and not ROS as it is rebooting anyway.
by biomesh
Tue Sep 05, 2023 1:50 pm
Forum: Announcements
Topic: SwOS Lite version 2.17 released!
Replies: 20
Views: 104042

Re: SwOS Lite version 2.17 released!

They also have to write that to update the software you need to turn on the device?
The comment you are referring to is actually relevant as on a crs318 at least, most ROS updates do not cause power interruption to the POE devices.
by biomesh
Wed Aug 16, 2023 6:52 pm
Forum: General
Topic: CRS112-8P-4S-IN ros V7 bad idea ??
Replies: 4
Views: 987

Re: CRS112-8P-4S-IN ros V7 bad idea ??

I have my CRS112 updated to v7 and it works fine as a switch. Via ssh the cpu runs at ~10%, but with winbox with an interface menu open (with couters) the CPU jumps to 30%. It has always been this way for the switch. You might get slightly better performance on v6, but not much. This is definitely a...
by biomesh
Wed Aug 16, 2023 2:14 pm
Forum: General
Topic: MikroTik hardware setup advice needed.
Replies: 6
Views: 874

Re: MikroTik hardware setup advice needed.

You also don't need to buy separate injectors as the cap acs come with them (and a power supply)
by biomesh
Wed Aug 16, 2023 2:11 pm
Forum: General
Topic: CRS112-8P-4S-IN ros V7 bad idea ??
Replies: 4
Views: 987

Re: CRS112-8P-4S-IN ros V7 bad idea ??

These devices (crs112) have weak CPUs so you will get high utilization in v7 or V6 when using winbox with certain menus open. To get a better idea of the normal load use an ssh session to the switch and monitor it that way. That said, if you are using these for more than a switch, I would not recomm...
by biomesh
Mon Jul 31, 2023 6:01 pm
Forum: Announcements
Topic: v7.11rc is released!
Replies: 195
Views: 50204

Re: v7.11rc is released!

Finally had a chance to rebuild my nextdns container and the ipv6 support (in my case dual stack) for veth interfaces is working perfectly.
by biomesh
Sat Jul 29, 2023 8:48 pm
Forum: RouterOS beta
Topic: IPv6 Prefix ID per IPv6 enabled interface
Replies: 31
Views: 5527

Re: IPv6 Prefix ID per IPv6 enabled interface

My comment was for dynamic allocations from an ISP. @DarkNate I can see that your config will work for a static allocation, but not for a dynamic one. I am using Comcast, so not a small ISP by any means. What are you asking lol, if the PD is dynamic, then it will always change. How's this a RouterO...
by biomesh
Sat Jul 29, 2023 2:33 pm
Forum: RouterOS beta
Topic: IPv6 Prefix ID per IPv6 enabled interface
Replies: 31
Views: 5527

Re: IPv6 Prefix ID per IPv6 enabled interface

My comment was for dynamic allocations from an ISP. @DarkNate I can see that your config will work for a static allocation, but not for a dynamic one. I am using Comcast, so not a small ISP by any means.
by biomesh
Sat Jul 29, 2023 6:08 am
Forum: RouterOS beta
Topic: IPv6 Prefix ID per IPv6 enabled interface
Replies: 31
Views: 5527

Re: IPv6 Prefix ID per IPv6 enabled interface

@DarkNate this can happen. Lets say you get a /60 from your isp from a dhcp client and put it in a pool of /64s. You assign 3 /64 prefixes from a pool to different vlan interfaces. Even if you reboot, the pool assignments are not stored on disk and not saved to disk. These are resident in memory, so...
by biomesh
Sat Jul 15, 2023 4:43 pm
Forum: RouterBOARD hardware
Topic: RB5009UPr+S+IN PoE out troubles
Replies: 14
Views: 6290

Re: RB5009UPr+S+IN PoE out troubles

The u6 ships with a 48v/.5a injector while the 5009 would provide 48v/.42a max. The u6 states the max power consumption would be 22w, which is more than what the 5009 with the default power supply can provide. You should probably look for a 57v/2a power supply (a 53v/2a might work) to power your 500...
by biomesh
Fri Jul 14, 2023 3:12 pm
Forum: Containers
Topic: IPv6 in containers
Replies: 11
Views: 6012

Re: IPv6 in containers

I do get that error message on a container restart but my container works and the address assignment is valid (I added commands in the container CMD to print the ipv6 addresses and routes)

The upcoming changes to ROS mean I can revert my changes to my container soon.
by biomesh
Fri Jul 14, 2023 2:47 am
Forum: General
Topic: Grandstream GXV3450 does not get DHCP lease from Mikrotik
Replies: 2
Views: 411

Re: Grandstream GXV3450 does not get DHCP lease from Mikrotik

The rfc states that option 42 needs to be a list of ip addresses. (not dns records)

https://www.rfc-editor.org/rfc/rfc2132

If you want to use a dns record you will most likely need to schedule a script that resolves the dns record and updates the dhcp options.
by biomesh
Fri Jul 14, 2023 12:31 am
Forum: Containers
Topic: IPv6 in containers
Replies: 11
Views: 6012

Re: IPv6 in containers

I added IPv6 to my CHR container running a nextdns client. I had to add support for both options 1 and 2 into my docker container (these are using ULA): Dockerfile FROM debian:bullseye-slim RUN apt-get update && apt-get install -y apt-transport-https curl && \ curl -o /usr/share/keyr...
by biomesh
Wed Jul 12, 2023 11:40 pm
Forum: General
Topic: DHCPv6 client cannot recover after outage
Replies: 18
Views: 2038

Re: DHCPv6 client cannot recover after outage

Here is a simplified and sanitized version of my ipv6 config that I have been using with comcast for close to 10 years (basically when it was added to ROS). /ipv6 address add disabled=no from-pool=comcast_ipv6 interface=internal /ipv6 dhcp-client add add-default-route=yes interface=wan pool-name=com...
by biomesh
Mon Jul 10, 2023 4:23 am
Forum: Beginner Basics
Topic: Need help setting up IPv6 on SpectraIP based RouterOS [SOLVED]
Replies: 5
Views: 1345

Re: Need help setting up IPv6 on SpectraIP based RouterOS [SOLVED]

/ipv6 address
add address=2a0d:2787:1b:482::a advertise=no 
/ipv6 route
add disabled=no dst-address=::/0 gateway=2a0d:2787:1b::1e10
/ip dns
servers=2a0e:2000::2000,2a11:b244::244
by biomesh
Thu Jul 06, 2023 2:20 pm
Forum: General
Topic: IPv6 Prefixes [SOLVED]
Replies: 14
Views: 4485

Re: IPv6 Prefixes [SOLVED]

The pool is just an address allocation. You already have the range with the /48, so you can't add it a second time. If you create an ipv6 dhcp server to hand out /60 prefixes to another router in your network you could, and then have it hand out /64 prefixes from the /60 it obtained from the /48 pre...
by biomesh
Wed Jul 05, 2023 4:25 pm
Forum: Beginner Basics
Topic: IPv6 ND with DNS cache?
Replies: 5
Views: 1677

Re: IPv6 ND with DNS cache?

Yes, but the address range would be whatever subnet range you want inside of fd00::/8. Ideally this would be a /64. If you use vlans, I would break the ipv6 /64 allocations to match your vlans. Here is a snippet from one of my routers: /ipv6 address add address=fd00:5::1 interface=vlan500 add addres...
by biomesh
Wed Jul 05, 2023 3:18 pm
Forum: Beginner Basics
Topic: IPv6 ND with DNS cache?
Replies: 5
Views: 1677

Re: IPv6 ND with DNS cache?

I suggest using ULA (fd00::/8 range) on your router and push this to clients via ND(dns config). https://en.m.wikipedia.org/wiki/Unique_local_address You would assign a static address (/64) to the router then make are the advertise flag is set on the address. The ND settings need to have your static...
by biomesh
Fri Jun 16, 2023 2:14 pm
Forum: SwOS
Topic: CSS326-24G-2S+ Switch Loss on SFP+ active
Replies: 4
Views: 2984

Re: CSS326-24G-2S+ Switch Loss on SFP+ active

Have you tried to disable flow control on the ports?
by biomesh
Fri Apr 21, 2023 2:37 pm
Forum: General
Topic: DHCP offering lease without success
Replies: 4
Views: 4778

Re: DHCP offering lease without success

I have only seen this on an older IP camera. I am sure there is a bug in the dhcp client or networking stack on the camera that causes this. Setting the device to a static IP avoids this issue for me.
by biomesh
Mon Apr 17, 2023 6:30 pm
Forum: Beginner Basics
Topic: Roku slow with Mikrotik
Replies: 9
Views: 984

Re: Roku slow with Mikrotik

Is it slow just on startup?

I have seen issues with rokus and RSTP. If you are using RSTP, or RSTP is enabled on your device/bridge, set the bridge port that the roku is on to edge=yes

/interface/bridge/port/set edge=yes interface=etherX
by biomesh
Fri Mar 03, 2023 12:41 am
Forum: RouterOS beta
Topic: L3HW Firewall Offloading - Doesn't Offload Inter-VLAN traffic [SOLVED]
Replies: 19
Views: 9217

Re: L3HW Firewall Offloading - Doesn't Offload Inter-VLAN traffic [SOLVED]

My crs317 with 7.8 works fine with inter and intra vlan traffic on the same or different interfaces.
by biomesh
Wed Mar 01, 2023 1:45 am
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 142210

Re: v7.8 [stable] is released!

Upgraded the following with no issues (been running over 34 hours)

ccr2004-16g-2s+, crs317, crs326-24g, crs112, cap ac, chr, crs318
by biomesh
Mon Feb 20, 2023 6:26 pm
Forum: General
Topic: How to mass configure 50 hAP units ?
Replies: 19
Views: 2077

Re: How to mass configure 50 hAP units ?

Flashfig is still listed as an option on the support website

https://help.mikrotik.com/docs/display/ROS/Flashfig
by biomesh
Sat Feb 04, 2023 11:49 pm
Forum: Beginner Basics
Topic: Disable CAP mode without UI
Replies: 5
Views: 2002

Re: Disable CAP mode without UI

The reset button puts it into reset config mode, caps mode or netinstall mode. Choose which one works best for you.

You might need to have it be a cap temporarily so you can reset it the way you want it to.
by biomesh
Sat Feb 04, 2023 11:42 pm
Forum: Beginner Basics
Topic: Disable CAP mode without UI
Replies: 5
Views: 2002

Re: Disable CAP mode without UI

/system/reset-configuration caps-mode=no
by biomesh
Sat Jan 28, 2023 3:42 pm
Forum: General
Topic: Forgetful Mikrotik [SOLVED]
Replies: 4
Views: 735

Re: Forgetful Mikrotik [SOLVED]

Are you out of space on your disk/flash?
by biomesh
Sat Jan 28, 2023 3:33 pm
Forum: RouterOS beta
Topic: RB5009UPr+S+ Bandwidth Issue
Replies: 27
Views: 4843

Re: RB5009UPr+S+ Bandwidth Issue

Do you get full speed if you test from a device with only a 1 gig nic?
by biomesh
Fri Jan 27, 2023 6:11 pm
Forum: Announcements
Topic: v7.7 [stable] is released!
Replies: 357
Views: 115649

Re: v7.7 [stable] is released!

My l3hw offload for ipv6 on a crs317 works with no issues. Here is my ipv6 specific config: /interface ethernet switch set 0 l3-hw-offloading=yes /interface ethernet switch l3hw-settings set ipv6-hw=yes /ipv6 address add address=fd00:70::1 interface=vlan70 add address=fd00::2 advertise=no interface=...
by biomesh
Mon Jan 23, 2023 4:51 pm
Forum: RouterBOARD hardware
Topic: MikroTik hAP ax³ [C53UiG+5HPaxD2HPaxD]
Replies: 80
Views: 26292

Re: MikroTik hAP ax³ [C53UiG+5HPaxD2HPaxD]

@Larin my ccr2004-16G has factory firmware 7.4.1 and factory software of 7.3.1, so not out of the ordinary it seems. What does seem concerning is that you had so many writes during your uptime of less than 5 hours.

Are you doing any work with containers or a lot of graphing?
by biomesh
Fri Jan 20, 2023 6:03 pm
Forum: Announcements
Topic: v7.8beta [testing] is released!
Replies: 307
Views: 78026

Re: v7.8beta [testing] is released!

Why do you quote whole preceding post? Does it help answering? Do you repeat what your interlocutor says when you discuss?
For a CHR instance without an active license
by biomesh
Fri Jan 20, 2023 1:58 pm
Forum: Wireless Networking
Topic: Netpower 16P adapter
Replies: 3
Views: 692

Re: Netpower 16P adapter

If any device needs 48v, you need to have a 48v power supply attached. The switch can have both a 24v and 48v adapter connected to power different devices connected to the switch at the same time.
by biomesh
Fri Jan 13, 2023 5:42 pm
Forum: Wireless Networking
Topic: Horribly slow Wi-Fi on Mikrotik network
Replies: 134
Views: 26084

Re: Horribly slow Wi-Fi on Mikrotik network

Actually market is full of other brand AX AP's for half of that.
The cheapest competitor in the US would be UniF--k AP lite. Which is $100.
I would not say it is full of $50 AX APs but you can find a Zyxel wifi 6 AP on amazon for $75 USD. Its not what I would buy, but there are options.
by biomesh
Fri Jan 13, 2023 1:38 pm
Forum: Beginner Basics
Topic: Configuration help [SOLVED]
Replies: 5
Views: 916

Re: Configuration help [SOLVED]

Under /ip settings you have ip-forward=no. If you want the router to route packets between networks that needs to be set to yes.
by biomesh
Sat Jan 07, 2023 6:45 am
Forum: RouterBOARD hardware
Topic: CCR2004-1G-12S-2XS - are there any "before you buy" caveats?
Replies: 8
Views: 3558

Re: CCR2004-1G-12S-2XS - are there any "before you buy" caveats?

The 12S+ had some issues initially with reboots (related to the port extender in the block diagram). I have not heard of issues with current versions, 7.5+, but they did exist. Be sure to check the test results and block diagram to see what the router can really do. The 2004-16G versions don't have ...
by biomesh
Fri Jan 06, 2023 9:39 pm
Forum: General
Topic: NextDNS service with RouterOS
Replies: 7
Views: 2434

Re: NextDNS service with RouterOS

To get the full logging, you would need to have the nextdns client installed on the devices or install it somewhere (docker, raspi, etc) in router mode (setup-router true). Depending on the mikrotik device used, this can definitely be run as a docker container.
by biomesh
Fri Jan 06, 2023 9:24 pm
Forum: General
Topic: NextDNS service with RouterOS
Replies: 7
Views: 2434

Re: NextDNS service with RouterOS

Also if you use the nextdns client (on a raspi, server, or in a docker container) you can specify different mac addresses to point to different configs. This is what I use to apply extra security to devices my kids use.
by biomesh
Fri Jan 06, 2023 9:21 pm
Forum: General
Topic: NextDNS service with RouterOS
Replies: 7
Views: 2434

Re: NextDNS service with RouterOS

I use the pro for myself and my parents - for the last 30 days we have had 1.5 mil queries with the bulk of them coming from my home network.
by biomesh
Fri Jan 06, 2023 8:56 pm
Forum: General
Topic: NextDNS service with RouterOS
Replies: 7
Views: 2434

Re: NextDNS service with RouterOS

If its a small charity, why not just use the "pro" nextdns plan which is $20 USD a year?
by biomesh
Thu Jan 05, 2023 3:20 pm
Forum: General
Topic: HW Offload on LAN ports not working [SOLVED]
Replies: 8
Views: 2117

Re: HW Offload on LAN ports not working [SOLVED]

Use a command similar to

/interface/bridge/port set bridge=bridge-wan interface=ether1 hw=no

Repeat for all interfaces in the wan bridge.
by biomesh
Thu Jan 05, 2023 2:02 pm
Forum: General
Topic: HW Offload on LAN ports not working [SOLVED]
Replies: 8
Views: 2117

Re: HW Offload on LAN ports not working [SOLVED]

You can only hardware offload on one bridge at a time. Remove the wan bridge, as it is not a bridged interface by default.
by biomesh
Tue Jan 03, 2023 2:29 pm
Forum: RouterBOARD hardware
Topic: CCR2216-PERFORMANCE problem
Replies: 12
Views: 4897

Re: CCR2216-PERFORMANCE problem

Since you won't share an export, there is only so much others on the forum can do to help.

I would start by checking fasttrack requirements

https://wiki.mikrotik.com/wiki/Manual:IP/Fasttrack

And then open a ticket with support.
by biomesh
Fri Dec 23, 2022 3:10 pm
Forum: RouterBOARD hardware
Topic: Please launch hAP with AX3000 or above
Replies: 9
Views: 2811

Re: Please launch hAP with AX3000 or above

More chains do help wrt MU-MIMO.

The cpu/ram would also need to be adjusted to handle the extra load.
by biomesh
Thu Dec 22, 2022 10:07 pm
Forum: RouterBOARD hardware
Topic: CCR2004-16G-2S+PC NO USB, WHYYY!??
Replies: 28
Views: 7706

Re: CCR2004-16G-2S+PC NO USB, WHYYY!??

At least it is better than the sdcard slot on the ccr1009 and ROS7 where it just does not work anymore. Clearly defined expectations/features are better than empty promises.
by biomesh
Sun Dec 18, 2022 10:54 pm
Forum: Beginner Basics
Topic: CRS112 Router Throughout Issue
Replies: 7
Views: 1196

Re: CRS112 Router Throughout Issue

The crs112 is a switch with very basic routing capacity.

https://mikrotik.com/product/CRS112-8G- ... estresults

Depending on your config ~30Mbps is probably to be expected.

The device only has a 400MHz Mips cpu, so it won't be able to do much on the routing side.
by biomesh
Thu Dec 15, 2022 1:28 pm
Forum: Beginner Basics
Topic: RB5009 upload problem
Replies: 11
Views: 2027

Re: RB5009 upload problem

Do you get full speeds using a 1G port on your lan / 5009 instead of the 2.5G port?
by biomesh
Fri Dec 09, 2022 2:05 pm
Forum: RouterBOARD hardware
Topic: NAND change and license migration ..Help
Replies: 35
Views: 4162

Re: NAND change and license migration ..Help

You admit you made a risky decision, and yet now want 'fairness'.

Either quietly email support and see if they can help, or buy a new license, or get rid of the device.

There isn't anything else to discuss anymore.
by biomesh
Sun Dec 04, 2022 1:57 pm
Forum: General
Topic: hAP ax2 Access Point Make in China - Legit?
Replies: 5
Views: 878

Re: hAP ax2 Access Point Make in China - Legit?

Check https://mikrotik.com/buy/

but it looks suspicious to me if the manufacturing third party (or whoever this is) would be trying to sell items outside of the normal distribution channels.
by biomesh
Mon Nov 28, 2022 6:24 pm
Forum: RouterBOARD hardware
Topic: CCR1009 Rebooting
Replies: 78
Views: 12589

Re: CCR1009 Rebooting

Just FYI my CCR1009 was running 7.5 for over a month without issues. I replaced it with a CCR2004, so the 1009 is not currently in use. The only issues I had with 7.x and the CCR1009 were/are: - sd card no longer works - in earlier 7.x version there was a bug with l2tp/ipsec where it would go into h...
by biomesh
Sun Nov 27, 2022 4:15 am
Forum: RouterBOARD hardware
Topic: CCR1009 Rebooting
Replies: 78
Views: 12589

Re: CCR1009 Rebooting

You might want to netinstall the device to make sure there isn't an issue with the flash or the os install. I would also check the capacitors to make sure none are failing. If you have a backup power supply, I would also test that as well.
by biomesh
Tue Nov 22, 2022 8:56 pm
Forum: General
Topic: CRS3xx config
Replies: 3
Views: 642

Re: CRS3xx config

I also create a vlan interface assigned to the bridge which will have the management IP. /interface vlan add interface=bridge1 name=vlan88 vlan-id=88 /ip address add address=192.168.88.1/24 comment=defconf interface=vlan88 network=\ 192.168.88.0 /interface bridge vlan add bridge=bridge tagged=bridge...
by biomesh
Tue Nov 15, 2022 9:44 pm
Forum: General
Topic: how does L3HW actually works?
Replies: 128
Views: 33667

Re: how does L3HW actually works?

Here is a snippet - not going into the actual enabling of l3hw as that is in the manual/wiki. This should be most of it to understand how I use it. CRS317 /ip address add address=192.168.6.1/23 interface=vlan600 network=192.168.6.0 add address=192.168.5.1/24 interface=vlan500 network=192.168.5.0 add...
by biomesh
Tue Nov 15, 2022 4:04 pm
Forum: General
Topic: how does L3HW actually works?
Replies: 128
Views: 33667

Re: how does L3HW actually works?

For soho, if you only have one subnet and you are not using the switch as your main router, then there really is no benefit. If you have multiple subnets/vlans on your network but use a separate router, then yes there is a definite benefit. If you use your crs device as a router, it might be better ...
by biomesh
Wed Nov 09, 2022 12:35 am
Forum: General
Topic: Wireguard Slow upload
Replies: 18
Views: 5079

Re: Wireguard Slow upload

On a CCR2004-16G-2S+ I get ~4.6 Gbps single threaded iperf with no wireguard both directions. With wireguard, I get 1.17Gbps (without -R) and 833Mbps (with -R). All tests single threaded. You might want to check your wireguard config on the computer or firewall/antivirus, etc.
by biomesh
Tue Nov 08, 2022 3:27 pm
Forum: General
Topic: Unable to reach Total Available Bandwidth on RB750gr3
Replies: 21
Views: 2463

Re: Unable to reach Total Available Bandwidth on RB750gr3

I'm pretty sure you are hitting the max that this device can provide, considering you are using PPPOE and multi-wan (with the associated rules). The performance tests for 6.x show for a 512 packet size of 385.4 Mbps speed, which will be higher than 7.x due to the removal of the Linux route cache in ...
by biomesh
Fri Nov 04, 2022 1:11 pm
Forum: RouterBOARD hardware
Topic: PoE Out of hAP ax² to power SXT LTE Kit
Replies: 7
Views: 1652

Re: PoE Out of hAP ax² to power SXT LTE Kit

I have bought a lot of mikrotik devices and I don't think I have ever seen a power supply "made" by them. I am sure they buy power supplies from different vendors as needs or supply levels change.
by biomesh
Wed Nov 02, 2022 1:50 pm
Forum: RouterBOARD hardware
Topic: CRS 305 after upgrade FW 7.6 CPU increased from 1 to 2 CPU
Replies: 4
Views: 926

Re: CRS 305 after upgrade FW 7.6 CPU increased from 1 to 2 CPU

The crs3xx series (many of them) have arm cpus. Many of the cpus have multiple cores, but with the older kernel could only use one with ros 6. With ros 7, these extra cores were enabled due to the newer Linux kernel. The crs328 is the only device so far that has had the extra core disabled in ros7.
by biomesh
Fri Oct 28, 2022 1:54 pm
Forum: RouterBOARD hardware
Topic: Any current issues with CCR2xxx series? Stay with CCR1xxx?
Replies: 1
Views: 657

Re: Any current issues with CCR2xxx series? Stay with CCR1xxx?

I have not had any reboot issues with a ccr2004-16G-2S+.

It shipped with 7.3.1, but upgraded it to 7.4 and subsequently to 7.5 and 7.6 with no issues.

It was an easy upgrade from my 1009.
by biomesh
Thu Oct 20, 2022 6:37 pm
Forum: General
Topic: RB3011 DHCP server fails to assign IPs to many Linux devices
Replies: 9
Views: 837

Re: RB3011 DHCP server fails to assign IPs to many Linux devices

How about removing

client-mac-limit=0

from your dhcp server.
by biomesh
Tue Oct 18, 2022 5:30 pm
Forum: Announcements
Topic: v7.6 [stable] is released!
Replies: 279
Views: 144105

Re: v7.6 [stable] is released!

Those two changelog entries don't mention anything about WinBox, from which you provided the screenshots. Look for them in CLI. These work via winbox on all of the devices that I upgraded. crs317, crs318, crs326, ccr2004, crs112, cap ac. For the cap ac and crs112 obviously the l3hw options are not ...
by biomesh
Thu Oct 13, 2022 12:02 am
Forum: General
Topic: CCR2004-16G-2S+ no default firewall?
Replies: 5
Views: 1017

Re: CCR2004-16G-2S+ no default firewall?

Some models, like CCRs don't come with an extensive default config as they are not designed for inexperienced users. https://wiki.mikrotik.com/wiki/Manual:Default_Configurations Start with the forums or help website and build the config (disconnected from the Internet) https://help.mikrotik.com/docs...
by biomesh
Wed Oct 12, 2022 1:35 pm
Forum: General
Topic: 7.4.x and 7.5 SIP issue
Replies: 17
Views: 3873

Re: 7.4.x and 7.5 SIP issue

If it broke everyone's voip, I'm sure there would be more than just a handful of people reporting an issue. I am currently using 7.5 and have been regularly updating ROS with no issues on my voip services. I use asterisk connecting to multiple providers. You could post your config or revert and open...
by biomesh
Wed Oct 05, 2022 6:08 pm
Forum: Announcements
Topic: v7.6rc is released!
Replies: 94
Views: 29459

Re: v7.6rc is released!

I finally decided to test ipv6 l3hw offloading on my crs317 with l3hw ipv4 already enabled. It was a few quick changes and now I get full 10gbps ipv6 on my internal vlans.
by biomesh
Tue Oct 04, 2022 5:17 pm
Forum: General
Topic: No health information on RB941-2nD [SOLVED]
Replies: 1
Views: 887

Re: No health information on RB941-2nD [SOLVED]

No, only devices listed with voltage/current/temperature/fan sensors will have health data. The ~$25 device has none of those.

https://mikrotik.com/product/RB941-2nD
by biomesh
Tue Oct 04, 2022 4:23 pm
Forum: RouterBOARD hardware
Topic: NetPower16 P - Enough power with 96W
Replies: 3
Views: 723

Re: NetPower16 P - Enough power with 96W

Yes, look at the different docs for CRS318-16P-2S+. That is the full model number.
by biomesh
Tue Oct 04, 2022 1:50 pm
Forum: Scripting
Topic: How can I create a IPv6 /64 prefix from dhcpv6 client provided /56 prefix
Replies: 5
Views: 1640

Re: How can I create a IPv6 /64 prefix from dhcpv6 client provided /56 prefix

Basic config dhcp client on the wan interface saving pd to a pool /ipv6 dhcp-client add add-default-route=yes interface=wan pool-name=comcast_ipv6 \ prefix-hint=::/60 request=address,prefix use-peer-dns=no ip address/prefix (::/64) assigned from the pd pool /ipv6 address add from-pool=comcast_ipv6 i...
by biomesh
Mon Oct 03, 2022 4:10 am
Forum: RouterBOARD hardware
Topic: RB850Gx2 less ram than in spec?
Replies: 3
Views: 920

Re: RB850Gx2 less ram than in spec?

I don't know how popular these were. They were discontinued in 2018 I believe.

For ram it should show the correct amount. For disk, It could have been partitioned.
by biomesh
Thu Sep 29, 2022 4:21 pm
Forum: Beginner Basics
Topic: Router on a stick with no bridge interface
Replies: 3
Views: 668

Re: Router on a stick with no bridge interface

First off the crs series - especially the 1xx and 2xx versions are primarily switches. You won't get great routing performance off of these devices. Second, running a speed test on a device itself is not the correct way to test as the device will use a lot of the CPU to just run the bandwidth test i...
by biomesh
Sun Sep 25, 2022 3:27 am
Forum: RouterBOARD hardware
Topic: [SOLVED] GESP - Confusion with the included hardware
Replies: 8
Views: 1244

Re: GESP - Confusion with the included hardware

The original gesp looked like this

https://www.streakwave.com/mikrotik-ges ... -protector

The docs probably refer to the newer model.

Do you have the older or newer model?
by biomesh
Sat Sep 24, 2022 4:08 am
Forum: RouterBOARD hardware
Topic: MikroTik hAP ax³ [C53UiG+5HPaxD2HPaxD]
Replies: 80
Views: 26292

Re: MikroTik hAP ax³ [C53UiG+5HPaxD2HPaxD]

Wow a level 6 license.
by biomesh
Thu Sep 22, 2022 6:10 pm
Forum: RouterBOARD hardware
Topic: is CRS317-1G-16S+ better than CCR2004-1G-12S+2XS?
Replies: 3
Views: 1015

Re: is CRS317-1G-16S+ better than CCR2004-1G-12S+2XS?

See what features can be hardware offloaded on a CRS317 https://help.mikrotik.com/docs/display/ROS/L3+Hardware+Offloading?src=contextnavpagetreemode If this is all you need now and in the future, go with a CRS317. If you need more than this or expect you will need more in the future get a CCR (or bo...
by biomesh
Thu Sep 08, 2022 5:33 pm
Forum: General
Topic: Slow internet speed but high LAN speed through CRS326
Replies: 5
Views: 1201

Re: Slow internet speed but high LAN speed through CRS326

I would make sure you test iperf going from the server to the client (either using -d or -R option). The output you show is the "upload" on your ISP test. If that shows 1Gbps, then the switch is working properly - it doesn't do anything special for out of your local subnet traffic unless y...
by biomesh
Thu Sep 08, 2022 1:50 pm
Forum: General
Topic: Slow internet speed but high LAN speed through CRS326
Replies: 5
Views: 1201

Re: Slow internet speed but high LAN speed through CRS326

If iperf both ways between switches work (with and without the -R option) then the issue would be at the firewall.

Check to see what the load is on the firewall and also check to see if you have enabled jumbo frames elsewhere in your network that is possibly being fragmented at the firewall.
by biomesh
Mon Sep 05, 2022 11:45 pm
Forum: Wireless Networking
Topic: if cAP loosing connection to CAPSMAN - they stop working
Replies: 10
Views: 2055

Re: if cAP loosing connection to CAPSMAN - they stop working

There is no automated way integrated that will sync capsman config between devices. You could script syncing changes or use the rest api to make changes on multiple servers at the same time.
by biomesh
Sun Sep 04, 2022 8:48 pm
Forum: Beginner Basics
Topic: Subnet Mask 23 Work On Dhcp But Not Fixed Ip
Replies: 5
Views: 1799

Re: Subnet Mask 23 Work On Dhcp But Not Fixed Ip

You can leave the router/gateway address the way it is, but set the network to 192.168.0.0 on the interface that has 192.168.1.1 assigned.
by biomesh
Fri Jul 22, 2022 3:48 pm
Forum: Wireless Networking
Topic: CapsMan on one of the APs?
Replies: 17
Views: 2065

Re: CapsMan on one of the APs?

Capsman also has the ability to set multiple capsman managers: When the list of available CAPsMANs is built, CAP selects a CAPsMAN based on the following rules: if caps-man-names parameter specifies allowed manager names (/system identity of CAPsMAN), CAP will prefer the CAPsMAN that is earlier in t...
by biomesh
Wed Jul 20, 2022 4:05 pm
Forum: Announcements
Topic: v7.4 [stable] is released!
Replies: 224
Views: 56580

Re: v7.4 [stable] is released!

ccr1009
crs318
crs317
crs326-24G
crs112-8G
cap-ac

All upgraded with no issues- upgraded from 7.3.
by biomesh
Mon Jul 18, 2022 2:42 pm
Forum: RouterBOARD hardware
Topic: Microtik crs326-24g-2s+rm
Replies: 4
Views: 819

Re: Microtik crs326-24g-2s+rm

That switch supports passive poe in (10-30V) according to the docs. This is only used to power the switch itself and not other connected devices.

https://mikrotik.com/product/CRS326-24G-2SplusRM
by biomesh
Fri Jul 15, 2022 3:07 pm
Forum: Beginner Basics
Topic: Newbie license/operation questions...
Replies: 2
Views: 433

Re: Newbie license/operation questions...

I suggest using a CHR version of routeros. It is a vm based install and you can choose the version based on max speed on the interfaces used. There is a 60 day trial license that can be used to verify functionality before spending any money on a license. The CHR licenses can be transferred between V...
by biomesh
Tue Jun 28, 2022 5:12 pm
Forum: Beginner Basics
Topic: CRS354 VLANs 100% cpu load
Replies: 9
Views: 1526

Re: CRS354 VLANs 100% cpu load

I would not start over - here is a sample config for reference: /interface bridge add admin-mac=XX:XX:XX:XX:XX:XX auto-mac=no name=bridge1 priority=0x2000 \ pvid=75 vlan-filtering=yes /interface ethernet set [ find default-name=ether1 ] l2mtu=9080 mtu=9000 set [ find default-name=ether2 ] l2mtu=9080...
by biomesh
Tue Jun 28, 2022 4:24 pm
Forum: Beginner Basics
Topic: CRS354 VLANs 100% cpu load
Replies: 9
Views: 1526

Re: CRS354 VLANs 100% cpu load

- you don't need vlan interfaces on a switch unless you are going to implement l3hw offloading (and perform routing) or want to assign an ip address for management to one of the vlans going through/to the switch (this vlan would be assigned to the bridge) - your ip address is assigned to ether2 and ...
by biomesh
Tue Jun 28, 2022 3:57 pm
Forum: Beginner Basics
Topic: CRS354 VLANs 100% cpu load
Replies: 9
Views: 1526

Re: CRS354 VLANs 100% cpu load

Did you enable l3hw offloading? This is primarily a switch and while there are some layer 3 routing features offloaded to the switch chip, the CPU is not going to be able to handle much routing outside of the functionality in the l3hw offloading specs. https://help.mikrotik.com/docs/display/ROS/L3+H...
by biomesh
Sat Jun 25, 2022 4:16 pm
Forum: Beginner Basics
Topic: Hex S VLAN Routing Speed
Replies: 16
Views: 2340

Re: Hex S VLAN Routing Speed

You don't have any firewall rules (only nat) and that also includes fasttrack. Perhaps look at enabling fasttrack to see if that helps.
by biomesh
Sat Jun 25, 2022 4:12 pm
Forum: Beginner Basics
Topic: Hex S VLAN Routing Speed
Replies: 16
Views: 2340

Re: Hex S VLAN Routing Speed

A bridge is only necessary if you have to extend a network across multiple interfaces. If you only use one lan port (even with multiple vlan interfaces) you don't need to use a bridge.

I was just mentioning it as something to consider testing.
by biomesh
Sat Jun 25, 2022 3:40 pm
Forum: Beginner Basics
Topic: Hex S VLAN Routing Speed
Replies: 16
Views: 2340

Re: Hex S VLAN Routing Speed

For the OP, you are only using two ports (wan and lan) so the bridge is not really necessary. I know on a ccr1009 the routing speed and cpu doesn't really differ with or without a bridge, but it might on your device. Are you using iperf for some of these tests btw? That would be the best way to test.
by biomesh
Sat Jun 18, 2022 10:35 pm
Forum: Announcements
Topic: v7.3 and v7.3.1 [stable] is released!
Replies: 269
Views: 82326

Re: v7.3 and v7.3.1 [stable] is released!

zerotier is only available for arm devices.
by biomesh
Fri Jun 17, 2022 2:58 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 164437

Re: v7.1rc3 adds Docker (TM) compatible container support

Any chance you might share some stats regarding mem and disk usage for some of the containers? So far I am only using a container I built for nextdns that is based on a small debian image. The tar file is 110MB and I still have the tar file on my disk and using ~300MB disk (I have other files on th...
by biomesh
Thu Jun 16, 2022 7:45 pm
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 164437

Re: v7.1rc3 adds Docker (TM) compatible container support

Did you install the container package from the "all packages" zip file?
by biomesh
Thu Jun 16, 2022 6:26 pm
Forum: Announcements
Topic: v7.4beta [testing] is released!
Replies: 189
Views: 62233

Re: v7.4beta [testing] is released!

Updated my containers from the 7.0x beta and was redeploy it on my CHR with no issues.
by biomesh
Fri Jun 10, 2022 3:13 pm
Forum: Beginner Basics
Topic: CRS305-1G-4S+IN as a media converter for WAN and switch for LAN?
Replies: 2
Views: 572

Re: CRS305-1G-4S+IN as a media converter for WAN and switch for LAN?

Just use vlans, and make sure it is properly configured. There is no reason why it can't work, but it does take more effort to configure than basic configs.
by biomesh
Thu Jun 09, 2022 11:36 pm
Forum: Beginner Basics
Topic: CAPsMAN unstable after upgrade to 7.3 [SOLVED]
Replies: 16
Views: 3901

Re: CAPsMAN unstable after upgrade to 7.3 [SOLVED]

If you see it on both, I would just skip capsman on 7.x for now.
by biomesh
Thu Jun 09, 2022 9:04 pm
Forum: Beginner Basics
Topic: CAPsMAN unstable after upgrade to 7.3 [SOLVED]
Replies: 16
Views: 3901

Re: CAPsMAN unstable after upgrade to 7.3 [SOLVED]

Since it is reporting out of memory conditions on the hap lite (which has 32MB RAM) you should probably move the capsman server to the cap lite since it has 64 MB RAM and let the hap lite be a capsman client. If you only have two APs, you could also just skip capsman and configure them separately. T...
by biomesh
Thu Jun 09, 2022 8:51 pm
Forum: General
Topic: CCR2216-1G-12XS-2XQ constanly reboots!!!! [SOLVED]
Replies: 21
Views: 4026

Re: CCR2216-1G-12XS-2XQ constanly reboots!!!! [SOLVED]

I see that your 192.168.1.x pool includes 192.168.1.1 which is already assigned to the router itself. It would not cause reboots, but should be fixed. The CCR devices do not come with a default firewall and so you must add one. I only see one firewall rule so you should work on that https://help.mik...
by biomesh
Thu Jun 09, 2022 2:43 pm
Forum: General
Topic: CCR2216-1G-12XS-2XQ constanly reboots!!!! [SOLVED]
Replies: 21
Views: 4026

Re: CCR2216-1G-12XS-2XQ constanly reboots!!!! [SOLVED]

Can you export and post your config so others can see what is configured on the device?
by biomesh
Fri Jun 03, 2022 3:16 pm
Forum: General
Topic: High CPU CRS354-48G-4S+2Q+
Replies: 15
Views: 3030

Re: High CPU CRS354-48G-4S+2Q+

The crs112 also has this issue. Reading the interface stats will increase the cpu load quite a bit.

I reported this issue, but I don't think there is much priority to look at or fix this on the mipsbe devices.
by biomesh
Wed May 18, 2022 11:19 pm
Forum: RouterBOARD hardware
Topic: RB dead? netinstall completes but no signs of life after reboot
Replies: 5
Views: 1028

Re: RB dead? netinstall completes but no signs of life after reboot

The only other suggestion I would make is to check the power supply. A bad or failing PS can have many different symptoms.
by biomesh
Mon May 09, 2022 3:25 pm
Forum: RouterBOARD hardware
Topic: Chassis opening vs warranty [SOLVED]
Replies: 18
Views: 3483

Re: Chassis opening vs warranty [SOLVED]

This whole topic seems odd to me - just opening the case does not void the warranty, at least in the US. What you do once the case is open, makes more of a difference. If you have a model that takes nvme/ssd/ram and you add or replace a user controlled component, then I would say the warranty is sti...
by biomesh
Sun May 08, 2022 2:41 pm
Forum: General
Topic: CAPSMAN not installed RouterOS7 [SOLVED]
Replies: 2
Views: 971

Re: CAPSMAN not installed RouterOS7 [SOLVED]

You have the wifiwave2 package installed which does not work with capsman.
by biomesh
Mon May 02, 2022 10:28 pm
Forum: General
Topic: Wireguard slow speed
Replies: 39
Views: 11797

Re: Wireguard slow speed

Are both of the devices using the same ISP? I see your results from your work server is fine.

I was just wondering if they are on the same ISP since there could be an issue with bandwidth limits on peering points between networks along the way if they are not on the same ISP.
by biomesh
Sun May 01, 2022 3:32 pm
Forum: General
Topic: Wireguard slow speed
Replies: 39
Views: 11797

Re: Wireguard slow speed

He is at site 1 downloading from site 2, from what I understand.
by biomesh
Sun May 01, 2022 2:56 pm
Forum: General
Topic: CRS112 just died on me - 48V connection an issue? [SOLVED]
Replies: 7
Views: 1161

Re: CRS112 just died on me - 48V connection an issue? [SOLVED]

The device can run on either voltage to power the device. The device will use the highest voltage connected to it to power itself though.
by biomesh
Sun May 01, 2022 2:44 pm
Forum: General
Topic: CRS112 just died on me - 48V connection an issue? [SOLVED]
Replies: 7
Views: 1161

Re: CRS112 just died on me - 48V connection an issue? [SOLVED]

If it's under warranty, I would rma it. if not, perhaps someone else can give you things to check on the board itself for repairs.
by biomesh
Sun May 01, 2022 2:42 pm
Forum: General
Topic: Wireguard slow speed
Replies: 39
Views: 11797

Re: Wireguard slow speed

The wording is a bit off - he is downloading (100 mbps) from the second site (600mbps), so ideally it would be close to 100mbps in ideal/perfect situations.

Have you tried iperf3 between sites?
by biomesh
Sun May 01, 2022 2:35 pm
Forum: General
Topic: CRS112 just died on me - 48V connection an issue? [SOLVED]
Replies: 7
Views: 1161

Re: CRS112 just died on me - 48V connection an issue? [SOLVED]

It should not matter. I would try with one power supply at a time, if you have different ones, try those.

From your description, this is the poe version of the switch, if it was not then you could also try to power via poe in.
by biomesh
Fri Apr 29, 2022 3:01 pm
Forum: General
Topic: CRS317 and TX-drops (maybe a workaround?)
Replies: 12
Views: 4310

Re: CRS317 and TX-drops (maybe a workaround?)

For the slower ports/interfaces try and set the ingress / egress port speed (switch interface) to close to what the interface can actually support. In the past when I used a 2.5 gb sfp+ adapter I had to set the rate to 2400 to get basically no retries and full speed (basically when sending traffic t...
by biomesh
Sun Apr 24, 2022 3:11 pm
Forum: RouterBOARD hardware
Topic: Problems with Temp. on CRS328
Replies: 8
Views: 1240

Re: Problems with Temp. on CRS328

Make sure you reference

https://wiki.mikrotik.com/wiki/MikroTik ... patibility

Also note that 10gbaseT sfp+ devices can generate a lot of heat

https://wiki.mikrotik.com/wiki/S%2BRJ10 ... l_guidance
by biomesh
Sun Apr 24, 2022 3:05 pm
Forum: RouterBOARD hardware
Topic: Problems with Temp. on CRS328
Replies: 8
Views: 1240

Re: Problems with Temp. on CRS328

Are the same type of sfp/sfp+ modules installed in both devices?

The temp reading (not cpu temp) on a number of switch models comes from the sfp/sfp+ modules themselves.
by biomesh
Fri Apr 22, 2022 3:13 pm
Forum: General
Topic: Yet another changelog thread
Replies: 52
Views: 3595

Re: v7.2.1 [stable] is released!

I think it is hilarious that gdanov thinks software companies will always provide full details of fixed bugs. I have worked for a global software company for over 20 years in a support role and found that while customers might think they are owed detailed answers on bugs/defects, it really depends o...
by biomesh
Wed Apr 20, 2022 6:02 pm
Forum: Announcements
Topic: v7.3rc [testing] is released!
Replies: 452
Views: 105497

Re: v7.3beta [testing] is released!

Is
*) ipsec - fixed IPsec IRQ initialization on startup on TILE;

Related to random high cpu seen on startup on TILE that shows as "networking" when using profile?
by biomesh
Wed Apr 20, 2022 6:14 am
Forum: Wireless Networking
Topic: WiFi with Apple Products
Replies: 99
Views: 33262

Re: WiFi with Apple Products

I would disable wpa2-eap and set the group key update to at least an hour (maybe more)
by biomesh
Tue Apr 19, 2022 11:50 pm
Forum: Wireless Networking
Topic: WiFi with Apple Products
Replies: 99
Views: 33262

Re: WiFi with Apple Products

You are better off posting an export of your config.
by biomesh
Tue Apr 19, 2022 7:41 pm
Forum: General
Topic: How bad is ROS for SMB sharing on a spare router?
Replies: 15
Views: 1158

Re: How bad is ROS for SMB sharing on a spare router?

Well, you can mention to her .. usually she's the one doing flushing :-P Well clearly she doesnt want to go to bed next to someone with soap in their hair!!. Out of curiosity, how many flushes does it take to get all the shampoo out?? I used to joke with my kids about using the "toilet twirl&q...
by biomesh
Tue Apr 19, 2022 6:19 pm
Forum: General
Topic: How bad is ROS for SMB sharing on a spare router?
Replies: 15
Views: 1158

Re: How bad is ROS for SMB sharing on a spare router?

Think of it this way:

How bad is it to clean your dishes/laundry in your toilet?

Can you do it - yes
Should you do it - no
by biomesh
Sat Apr 16, 2022 3:22 pm
Forum: Beginner Basics
Topic: 1st "complex" routerOS build issue
Replies: 5
Views: 747

Re: 1st "complex" routerOS build issue

If you do actually use capsman on such a slow device as a crs112, I world suggest not using capsman forwarding.
by biomesh
Fri Apr 15, 2022 5:31 pm
Forum: RouterBOARD hardware
Topic: CCR1009-7G-1C-1S+ very High CPU usage
Replies: 6
Views: 1609

Re: CCR1009-7G-1C-1S+ very High CPU usage

Get a supout and submit it to support. I have seen this a few times, but I can't reproduce the issue at will.
by biomesh
Fri Apr 15, 2022 5:44 am
Forum: Beginner Basics
Topic: CRS 112 Switch Configure
Replies: 1
Views: 492

Re: CRS 112 Switch Configure

Post an export of your config so that members can see what needs to be fixed.
by biomesh
Tue Apr 05, 2022 6:57 pm
Forum: General
Topic: Which product can support at least 200 hotspot users?
Replies: 16
Views: 2412

Re: Which product can support at least 200 hotspot users?

The SMIPS devices are for very light use / lab / toy use. Don't expect it to do much, especially with 32MB RAM.
by biomesh
Tue Apr 05, 2022 5:22 pm
Forum: General
Topic: Which product can support at least 200 hotspot users?
Replies: 16
Views: 2412

Re: Which product can support at least 200 hotspot users?

But I think the OP wants to build a network for 200 people for $25 USD. Isn't the cheapest way the best way? :lol:
by biomesh
Tue Apr 05, 2022 4:49 pm
Forum: Announcements
Topic: Missing RouterOS configuration after a reboot on very rare occasions [SOLVED]
Replies: 73
Views: 39644

Re: Missing RouterOS configuration after a reboot on very rare occasions [SOLVED]

They key question here: HOW did you get to that 7.2rc7 version ? Coming from ROS6 OR ROS7 <7.1 and then upgrade upgrade upgrade ? Or netinstall from a version >=7.1 and then moving on to 7.2rc7 ?? I am going to assume the first option. And then it DOES apply, if I understood it well. Strods did not...
by biomesh
Mon Apr 04, 2022 3:24 pm
Forum: General
Topic: https://support.mikrotik.com/ provides SSL_ERROR_BAD_CERT_DOMAIN
Replies: 10
Views: 850

Re: https://support.mikrotik.com/ provides SSL_ERROR_BAD_CERT_DOMAIN

Since this is a dns, web server or reverse proxy configuration issue, I would open a ticket to get someone internally to fix.
by biomesh
Mon Apr 04, 2022 3:08 pm
Forum: General
Topic: Slow speed on 10G ports
Replies: 2
Views: 809

Re: Slow speed on 10G ports

If you are running the bandwidth tests on the devices themselves that is the issue. This is primarily a switch and the cpu will get overloaded from generating the traffic. Normally you will setup two devices (destop, laptop, etc) to run bandwidth test and have the switch "between" the two ...
by biomesh
Fri Mar 25, 2022 12:14 am
Forum: General
Topic: DHCP tftp option for Grandstream provisioning [SOLVED]
Replies: 14
Views: 4463

Re: DHCP tftp option for Grandstream provisioning [SOLVED]

Option 66 is tftp server name not tftp server address(option 150). Using that option decodes correctly in wireshark when using a URL. You can use 'https://192.168.1.1:8090' s'https://192.168.1.1:8090' I would use the packet sniffer from the router to make sure it is being sent. If wireshark decodes ...
by biomesh
Thu Mar 24, 2022 8:08 pm
Forum: General
Topic: DHCP tftp option for Grandstream provisioning [SOLVED]
Replies: 14
Views: 4463

Re: DHCP tftp option for Grandstream provisioning [SOLVED]

Why are you using a http url for a tftp address? RFC5859 states this needs to be an IP address (or multiple IP addresses) not a URL. You need to convert each octet of the IP address to HEX and then set the option. For instance if I have two tftp servers: 192.168.6.1 and 10.1.1.1 it would be: 0xC0A80...
by biomesh
Thu Mar 24, 2022 7:23 pm
Forum: General
Topic: Help! 3011 Capped at 150Mbps
Replies: 9
Views: 2004

Re: Help! 3011 Capped at 150Mbps

Looking at the block diagram, eth1-eth5 has access to both cpus. You have a module in sfp1 (looing at the comments on the interface at least) which means sfp1 and eth6-eth10 only have access to one cpu core. You could try to move the interfaces around to see if that helps performance. You don't stat...
by biomesh
Thu Mar 24, 2022 5:17 am
Forum: Beginner Basics
Topic: 10Gbit network and internet [SOLVED]
Replies: 2
Views: 1793

Re: 10Gbit network and internet [SOLVED]

The crs305 is primarily a switch with some l3 features. With version 7 you can get some l3 hardware offloading of the routing, but that device does not support offloading of fasttrack or nat. Due to this limitation, your speeds, if you plan on using a firewall would be pretty low. You could try a cr...
by biomesh
Thu Mar 10, 2022 5:28 pm
Forum: General
Topic: RouterOS 7 Bridge VLAN/DHCP client issue after upgrade
Replies: 23
Views: 6963

Re: RouterOS 7 Bridge VLAN/DHCP client issue after upgrade

Here are the relevant snippets: /interface bridge add admin-mac=AA:BB:CC:DD:EE:FF auto-mac=no name=bridge1 priority=0x2000 \ pvid=75 vlan-filtering=yes /interface bridge vlan add bridge=bridge1 tagged=sfp-sfpplus1 untagged=ether24,bridge1 vlan-ids=75 /ip dhcp-client add interface=bridge1 On this dev...
by biomesh
Thu Mar 10, 2022 2:25 pm
Forum: General
Topic: RouterOS 7 Bridge VLAN/DHCP client issue after upgrade
Replies: 23
Views: 6963

Re: RouterOS 7 Bridge VLAN/DHCP client issue after upgrade

I have used the dhcp client/bridge combo for quite some time on crs3xx switches. It worked flawlessly in the 6.x and 7.x versions until 7.2rc2/3. I reported the issue with support and in my report pointed out that switching to tagged/vlan interface config did indeed work. Both methods have their use...
by biomesh
Sun Feb 20, 2022 8:07 am
Forum: General
Topic: CCR2004-16G-2S+ NAT rules are flaky and often do not work [SOLVED]
Replies: 5
Views: 1424

Re: CCR2004-16G-2S+ NAT rules are flaky and often do not work [SOLVED]

Post your config if you want good feedback and not guesses.
by biomesh
Tue Feb 15, 2022 1:54 pm
Forum: Wireless Networking
Topic: Wi-Fi issue
Replies: 20
Views: 4149

Re: Wi-Fi issue

I would try local forwarding as you aren't using a super powerful device as a capsman server.
This would be in your data path config.
by biomesh
Sun Feb 13, 2022 2:53 pm
Forum: Announcements
Topic: v7.1.2 is released!
Replies: 127
Views: 40102

Re: v7.1.2 is released! => CCR1009 stuck in boot loop

Learning the hard way.... Post Mortem analysis: Press any key within 2 seconds to enter setup.. loading kernel... OK setting up elf image... OK jumping to kernel code Could not mount ubifs/yaffs filesystem: No such device This just means you need to netinstall. This is a random issue seen at least ...
by biomesh
Sun Feb 13, 2022 2:46 pm
Forum: General
Topic: TILE Broken After Rollback from 7.1.2 to 7.1.1
Replies: 3
Views: 826

Re: TILE Broken After Rollback from 7.1.2 to 7.1.1

When you see Could not mount ubifs/yaffs filesystem This means you need to netinstall. I had this happen on my ccr1009 during one of the 7.x updates - the rest of the 7.x updates were fine. Imo, it looks like something is corrupting the partition/partition table. In my case it was 7.2rc2 to 7.2rc3. ...
by biomesh
Wed Feb 02, 2022 11:12 pm
Forum: General
Topic: Trouble with Netinstall using Linux
Replies: 6
Views: 2570

Re: Trouble with Netinstall using Linux

Does it run correctly without using sudo? It runs fine on a Linux VM in my lab using root.
by biomesh
Wed Feb 02, 2022 4:13 pm
Forum: General
Topic: Trouble with Netinstall using Linux
Replies: 6
Views: 2570

Re: Trouble with Netinstall using Linux

The netinstall binary is compiled for intel architectures (i686/x86_64) and won't run on arm devices, like a Raspberry PI.
by biomesh
Fri Jan 28, 2022 8:01 pm
Forum: Announcements
Topic: v7.2rc2 and v7.2rc3 is released!
Replies: 222
Views: 87082

Re: v7.2rc2 and v7.2rc3 is released!

Had an issue with the upgrade ccr1009 - the nand /filesystem was corrupt and had to netinstall. I also was able to duplicate the issue with high utilization on the ccr1009 with regards to l2tp/ipsec. I had no issues with the netinstall/reimport with the exception of the certs, which is to be expecte...
by biomesh
Fri Jan 28, 2022 3:20 pm
Forum: Announcements
Topic: v7.2rc2 and v7.2rc3 is released!
Replies: 222
Views: 87082

Re: v7.2rc2 is released!

On my crs3xx devices seems to have broken access to my management interfaces (dhcp client on the bridge). The switches work but I can't manage them except through a console cable. ccr1009, cap ac, crs112, and chr working fine. I think this has to do with some of the changes to vlan filtering. **mayb...
by biomesh
Sun Jan 23, 2022 7:24 pm
Forum: General
Topic: Frequent reboots of hAP ac2 [SOLVED]
Replies: 24
Views: 5181

Re: Frequent reboots of hAP ac2 [SOLVED]

Have you tried a different power supply (swap the one with the bad device with one of the good ones) or maybe netinstalled the device?

It could be some sort of nand/flash issue and that it why I mentioned netinstall.
by biomesh
Wed Jan 19, 2022 3:16 pm
Forum: General
Topic: CCR1009 CPU load 100%
Replies: 11
Views: 3381

Re: CCR1009 CPU load 100%

An insecure router can remain that way until it is compromised.

If load has not changed going to or through the server, outside of a hardware failure(which this does not seem too be the case) then you should really start to closely look at the config.
by biomesh
Tue Jan 18, 2022 8:21 pm
Forum: General
Topic: CCR1009 CPU load 100%
Replies: 11
Views: 3381

Re: CCR1009 CPU load 100%

If you can't post the export you should deal with mikrotik support only. Since this is a user forum we can only help if we have actual examples/exports to look at.
by biomesh
Fri Jan 07, 2022 12:13 am
Forum: General
Topic: Wireguard Speed and CPU
Replies: 9
Views: 8454

Re: Wireguard Speed and CPU

Using iperf3 and my ccr1009 and wireguard I average 450Mbps at ~50% cpu. This is on 7.2rc1.
by biomesh
Wed Jan 05, 2022 3:35 pm
Forum: RouterBOARD hardware
Topic: Number of CPU cores on CRS3xx
Replies: 13
Views: 5672

Re: Number of CPU cores on CRS3xx

Those with dual core support were a different chipset 98dx82xx series vs 98dx3236.

My guess is that kernel support for the 98dx3236 was not complete with the old kernel in 6x
by biomesh
Tue Jan 04, 2022 5:53 pm
Forum: RouterBOARD hardware
Topic: Number of CPU cores on CRS3xx
Replies: 13
Views: 5672

Re: Number of CPU cores on CRS3xx

According to the following PDF, they are dual core. I am guessing the updated kernel in v7 allowed for the use of both cores vs the v6 kernel.

https://wifimag.ro/pdf/Prestera_98DX3336_pb.pdf
by biomesh
Fri Dec 31, 2021 2:55 pm
Forum: General
Topic: You've got to be kidding me. [SOLVED]
Replies: 18
Views: 3500

Re: You've got to be kidding me. [SOLVED]

16M of flash is really too small no matter what. I was trying to point out that the smips devices have more issues than the rest due to limited flash and memory. Outside of the smips devices I have not had issues upgrading 6.x. Going to 7.x I had issues but that is because I used separate packages. ...
by biomesh
Fri Dec 31, 2021 2:21 pm
Forum: General
Topic: You've got to be kidding me. [SOLVED]
Replies: 18
Views: 3500

Re: You've got to be kidding me. [SOLVED]

While I think the minimum amount of flash should be higher 64M or 128M and Ram should start at 128M, this would increase the cost of the devices. In your case you reference the hap light which is basically the cheapest device mt sells (along with the hap mini) at $20 usd. It only has 16M of flash - ...
by biomesh
Thu Dec 30, 2021 6:03 pm
Forum: Beginner Basics
Topic: 1GB Fiber Internet, only 300MB via CRS309
Replies: 5
Views: 2386

Re: 1GB Fiber Internet, only 300MB via CRS309

You are using it as a router, generally not a good idea for a switch. You might get better performance using the l3hw offloading on this device with ros 7 (which you are using)

https://help.mikrotik.com/docs/display/ ... Offloading
by biomesh
Thu Dec 30, 2021 3:09 pm
Forum: Beginner Basics
Topic: 1GB Fiber Internet, only 300MB via CRS309
Replies: 5
Views: 2386

Re: 1GB Fiber Internet, only 300MB via CRS309

If it's only used for switching it should not be hitting the CPU at all. If you get high CPU during the tests, then you have a configuration issue and you should post an export of your config. If you are using it for routing, well, this might be the best you will get as this is primarily a switch wi...
by biomesh
Wed Dec 29, 2021 7:26 pm
Forum: RouterBOARD hardware
Topic: hAP ac3 Block Diagram Discrepency
Replies: 3
Views: 3366

Re: hAP ac3 Block Diagram Discrepency

All of the other devices with that chipset - hapac2/capac/wap ac show it as part of the SoC as well.
by biomesh
Tue Dec 28, 2021 9:52 pm
Forum: Wireless Networking
Topic: CAPSMAN and WMM
Replies: 6
Views: 4321

Re: CAPSMAN and WMM

If you use capsman, then some settings are enabled by default and some cannot be changed. As for WMM it is enabled when using capsman. I am unsure why you would not want to use it.
by biomesh
Mon Dec 27, 2021 2:24 am
Forum: RouterBOARD hardware
Topic: CCR 1009 and SD card
Replies: 14
Views: 14923

Re: CCR 1009 and SD card

There is an open bug with sd cards on the ccr1009 models (at least) on 7.x
by biomesh
Wed Dec 22, 2021 6:57 pm
Forum: RouterOS beta
Topic: Ipv6 preferred pool
Replies: 5
Views: 2223

Re: Ipv6 preferred pool

It could - just a bit more work on the programming side since the ::1:0:0:0:1/64 etc would need to calculate the source PD and then determine how to apply the value. With a /48 it could be a literal assignment. Perhaps the command could be written as ::{1}:0:0:0:1/64 etc to determine if it is a lite...
by biomesh
Wed Dec 22, 2021 5:02 pm
Forum: RouterOS beta
Topic: Ipv6 preferred pool
Replies: 5
Views: 2223

Re: Ipv6 preferred pool

I think that would help if you have a static (or fairly static) larger delegation. In my case I get a /60 from comcast and it can change (not often, but it can), so the /48 prefix example would not work in my situation. I am just looking for delegation stickiness when assigning addresses/prefixes fr...
by biomesh
Wed Dec 22, 2021 3:14 pm
Forum: RouterOS beta
Topic: Ipv6 preferred pool
Replies: 5
Views: 2223

Ipv6 preferred pool

I submitted the following as a feature request. Any feedback, support or improvements to the idea are welcome. When ipv6 is used with a pd and addresses are assigned to interfaces with the from-pool option, the assignment seems totally random. Is there a way there could be a preferred address option...
by biomesh
Tue Dec 21, 2021 6:14 pm
Forum: Announcements
Topic: v7.2rc1 is released!
Replies: 240
Views: 162090

Re: v7.2rc1 is released!

This version broke communication between a crs318 and a crs317 with a SFP+ 10Gbase-T adapters (same adapter type on both ends). It works fine with 7.1 and 7.1.1.
by biomesh
Sat Dec 11, 2021 2:45 pm
Forum: RouterOS beta
Topic: Speed drop after update to 7.1stable [SOLVED]
Replies: 39
Views: 17988

Re: Speed drop after update to 7.1stable [SOLVED]

Did you disable your layer 7 rule as well for your test?
by biomesh
Sun Dec 05, 2021 7:06 pm
Forum: General
Topic: Mikrotik equipment to the new home
Replies: 20
Views: 3913

Re: Mikrotik equipment to the new home

I mean if you go to the FCC website... They have year downs of the units. And the boards are stamped as Emplus.
I didn't see it on the eap660HD pdfs, but the quality is not that good. The ethernet/power/reset layout on the tp-link is also different compared to the engenius/netgear models.
by biomesh
Sun Dec 05, 2021 2:58 pm
Forum: General
Topic: Mikrotik equipment to the new home
Replies: 20
Views: 3913

Re: Mikrotik equipment to the new home

TP-Link and Eugenius clearly went to the same OEM this time around. Looks like Emplus WAP380 is definitely the Eugenius WAP.
Are you thinking of the Netgear APs? They are basically the engenius APs but with less RAM.
by biomesh
Sat Dec 04, 2021 11:20 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 229216

Re: v7.1 is released!

There is problem with sending e-mails from router in Netwatch tool (Up and Down scripts) Sending from Terminal is OK /tool e-mail send to="someone@somedomain.tld" subject="Failover is UP" body="Main ISP failed..." tls=yes The same command in Netwatch, tab Up and Down s...
by biomesh
Fri Dec 03, 2021 5:34 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 229216

Re: v7.1 [testing] is released!

Looks like I lost access to SD cards on my CCR1009 with this release. My existing sd card is not visible and a new card is also not visible.
by biomesh
Fri Dec 03, 2021 4:57 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 229216

Re: v7.1 [testing] is released!

I saw my ccr1009 had 95+% utilization on 4 cores (represented as "networking" in the profile tool) and l2tp/ipsec (looked more like an ipsec issue) would not connect as a client. A reboot had everything back to normal. I did not get a supout.rif, but I will get one if I see the issue again.
by biomesh
Fri Dec 03, 2021 2:14 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 229216

Re: v7.1 [testing] is released!

On devices with only 16M of flash I always use the minimum packages needed. The upgrade worked on most devices, but any with the wireless package installed it failed with the space error. When the device is wired, this is just an extra reboot to remove the package and reboot then upgrade. For device...
by biomesh
Sun Nov 21, 2021 3:00 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 164437

Re: v7.1rc3 adds Docker (TM) compatible container support

Either rebuild the image/container or map it to persistent storage on the router.
by biomesh
Thu Nov 18, 2021 3:57 pm
Forum: General
Topic: link up/down cause
Replies: 4
Views: 1036

Re: link up/down cause

It could be something else, but linking at 10M half duplex is highly suspicious of a bad cable.
by biomesh
Thu Nov 18, 2021 1:38 pm
Forum: General
Topic: No audio on sip calls over VPN
Replies: 8
Views: 2758

Re: No audio on sip calls over VPN

Check the values for
Settings -> asterisk sip settings -> general sip settings -> nat settings -> local networks

If your network is not listed here, it will be precessed as at nat connection, even if it is not.

One of the symptoms of mis configured nat settings is no audio.
by biomesh
Wed Nov 17, 2021 11:35 pm
Forum: General
Topic: 100% CPU on MIPS 24kc V7.4
Replies: 5
Views: 3065

Re: 100% CPU on MIPS 24kc V7.4

Running winbox with windows with counters/statistics (like firewall or interface) will increase the CPU quite a bit. You are using one(if not the) slowest of the CPUs available on current hardware. I suggest closing all windows in your session and close /re-open winbox. Your CPU will most likely be ...
by biomesh
Tue Nov 16, 2021 2:09 pm
Forum: Beginner Basics
Topic: Problem with port isolation on crs326-24g-2s+rm
Replies: 11
Views: 2477

Re: Problem with port isolation on crs326-24g-2s+rm

I would start by only using one bridge and making sure all ports are hardware offloaded.

Normally by just having one bridge and all ports assigned to it will take care of it.
by biomesh
Fri Nov 12, 2021 5:01 pm
Forum: General
Topic: Mikrotik router Hacked!!!
Replies: 140
Views: 57409

Re: Mikrotik router Hacked!!!

Scenario: Bob reads about this, Bob updates his unsecured router, Bob sets protected routerboot thinking at it as a security measure, confirms it with the press of the button. Pedro gets in Bobs unsecured router easily, sees the protected bootloader set, changes the reformat-hold-button and reforma...
by biomesh
Fri Nov 12, 2021 2:57 pm
Forum: General
Topic: Mikrotik router Hacked!!!
Replies: 140
Views: 57409

Re: Mikrotik router Hacked!!!

Thanks Normis - great motivation to get people to upgrade!
by biomesh
Thu Nov 11, 2021 10:51 pm
Forum: General
Topic: which switch to choose for 1/2.5Gbps switching? [SOLVED]
Replies: 10
Views: 3734

Re: which switch to choose for 1/2.5Gbps routing? [SOLVED]

If you need 10 up to 10G ports then the CRS317 would be the best fit if you plan on using some 1G only SFP adapters or if you are going to use SFP+ DACs for some connections.

https://wiki.mikrotik.com/wiki/S%2BRJ10 ... l_guidance
by biomesh
Tue Nov 09, 2021 5:37 pm
Forum: General
Topic: CRS317 10G port to 1G speed issues [SOLVED]
Replies: 4
Views: 1425

Re: CRS317 10G port to 1G speed issues [SOLVED]

Set it a bit below, perhaps 900-920 Mbps. Basically run iperf tests until you see the retries drop to zero or almost zero for the correct value.
by biomesh
Tue Nov 09, 2021 5:34 pm
Forum: Beginner Basics
Topic: CRS309 Switch - cannot ping gateway or any other host
Replies: 17
Views: 4013

Re: CRS309 Switch - cannot ping gateway or any other host

The ccr1009 can route around 7-8 Gbps with or without a bridge involved. It really does not matter with the tests I have done in the past.
by biomesh
Tue Nov 09, 2021 2:02 pm
Forum: General
Topic: CRS317 10G port to 1G speed issues [SOLVED]
Replies: 4
Views: 1425

Re: CRS317 10G port to 1G speed issues [SOLVED]

Is the slowness only on the customers download/receiving speed but not the upload/send?

If so, I would set an egress rate limit on the port to see if that addresses the issue for you.
by biomesh
Fri Nov 05, 2021 3:11 pm
Forum: General
Topic: Mikrotik router Hacked!!!
Replies: 140
Views: 57409

Re: Mikrotik router Hacked!!!

It would be also interesting to see exports from what you call a good/clean config vs one that is hacked.
by biomesh
Tue Nov 02, 2021 6:30 pm
Forum: General
Topic: RouterBOARD 941-2nD V6.48.3 get 100% CPU after power down
Replies: 1
Views: 521

Re: RouterBOARD 941-2nD V6.48.3 get 100% CPU after power down

Run /tool/profile
and see what is taking up the CPU. If you have an export you can post that as well.
by biomesh
Tue Nov 02, 2021 1:16 pm
Forum: Wireless Networking
Topic: CAPsMAN error no supported Channels [SOLVED]
Replies: 7
Views: 6030

Re: CAPsMAN error no supported Channels [SOLVED]

Each radio can either be 5g or 2g. You need a separate provisioning rule/entry for each radio. This means a dual band device would need 2 separate rules.
by biomesh
Mon Oct 25, 2021 11:34 pm
Forum: General
Topic: RB951Ui-2HnD - Stuck on loop after upgrading to 6.49
Replies: 1
Views: 566

Re: RB951Ui-2HnD - Stuck on loop after upgrading to 6.49

I always recommend the following when using a device with usb but no console port:

https://mikrotik.com/product/woobm
by biomesh
Sat Oct 16, 2021 2:39 pm
Forum: Wireless Networking
Topic: hap ac3 - worse than hap lite?
Replies: 23
Views: 5895

Re: hap ac3 - worse than hap lite?

Capsman at this time, cannot manage radios using the wave2 package.
by biomesh
Thu Oct 14, 2021 3:34 am
Forum: Beginner Basics
Topic: Why is my CAPsMAN network not as good as I hope for?
Replies: 25
Views: 5838

Re: Why is my CAPsMAN network not as good as I hope for?

If it's mainly just the apple devices, try to increase the lease time. Others have reported issues with shorter lease times on apple devices.
by biomesh
Wed Oct 13, 2021 6:07 pm
Forum: Beginner Basics
Topic: Why is my CAPsMAN network not as good as I hope for?
Replies: 25
Views: 5838

Re: Why is my CAPsMAN network not as good as I hope for?

Generally speaking local-forwarding=no means all wifi traffic will be handled by the capsman server (via a bridge interface) and will be slower than with local-forwarding=yes - many times much slower. I have never heard of faster performance with local-forwarding=no unless you have something very od...
by biomesh
Tue Oct 12, 2021 7:24 pm
Forum: General
Topic: How to create IPv6 subnet with prefix delegation
Replies: 6
Views: 7894

Re: How to create IPv6 subnet with prefix delegation

Generally you would start with your dhcp client to get the prefixes and add them to a pool: /ipv6 dhcp-client add add-default-route=yes interface=wan pool-name=comcast_ipv6 prefix-hint=::/60 request=address,prefix use-peer-dns=no Then you just need to add an address to the the vlan interface that co...
by biomesh
Wed Oct 06, 2021 2:26 pm
Forum: General
Topic: Fans in CRS326-24G-2S+IN
Replies: 3
Views: 774

Re: Fans in CRS326-24G-2S+IN

The fan holes only fit 30x30 fans so that is your limitation. I ran then externally mounted from a USB power supply adapter for a while until I got tired of the sound. Not the most professional looking, but it works.
by biomesh
Wed Oct 06, 2021 12:57 am
Forum: General
Topic: Fans in CRS326-24G-2S+IN
Replies: 3
Views: 774

Re: Fans in CRS326-24G-2S+IN

The space available on the IN cases only allow for a 30x30 fan, which there are not as many choices as the fans for the RM version which allow for 40x40 fans. For the most part you are left with using fans for raspberry pis. These are generally cheap and can run 3.3v or 5v but are not very quiet.
by biomesh
Thu Sep 30, 2021 10:03 pm
Forum: General
Topic: CRS326 Rack ears [SOLVED]
Replies: 5
Views: 1669

Re: CRS326 Rack ears [SOLVED]

My CRS326 (IN version) has two small holes, not four and the holes are smaller and don't have any threads like any other rack capable mikrotik devices. Your best best is a shelf like stated above.
by biomesh
Mon Sep 27, 2021 11:19 pm
Forum: Beginner Basics
Topic: Why is my CAPsMAN network not as good as I hope for?
Replies: 25
Views: 5838

Re: Why is my CAPsMAN network not as good as I hope for?

As you can see from hes config above he did that, so did i, while you are right and old protocols are total performanse killers and cause problems, in this case its not helping. His config did not have those settings, thus the suggestion. Those are the settings I use with zero issues. I don't use a...
by biomesh
Mon Sep 27, 2021 10:05 pm
Forum: Beginner Basics
Topic: Why is my CAPsMAN network not as good as I hope for?
Replies: 25
Views: 5838

Re: Why is my CAPsMAN network not as good as I hope for?

I would set your 2ghz channels to 2ghz-onlyn or at least 2ghz-g/n. For 5ghz set it to 5ghz-n/ac. You could have issues negotiating the older protocols.
by biomesh
Fri Sep 24, 2021 7:49 pm
Forum: Wireless Networking
Topic: wifi devices hop between access points
Replies: 6
Views: 2086

Re: wifi devices hop between access points

If you have the APs spread out you could use the access list and have accept rules for those MAC addresses to each AP with a signal level that is really good i.e. (-50..120). This way if the device gets too far away from any one AP it will only connect to one of the APs. This won't help though if th...
by biomesh
Thu Sep 23, 2021 11:23 pm
Forum: Wireless Networking
Topic: Capsman WPA2 key for each device
Replies: 2
Views: 1141

Re: Capsman WPA2 key for each device

Do they randomize the full mac address or just the last three octets (or something similar)? If part of the mac address is consistent between devices you could use the mac mask option to only have the rule to apply to certain mac address ranges. There is no way that I can see where you can limit the...
by biomesh
Thu Sep 23, 2021 11:11 pm
Forum: Beginner Basics
Topic: IPv6 help [SOLVED]
Replies: 16
Views: 4805

Re: IPv6 help [SOLVED]

I don't see an issue with your vlan config on the router, but you could have an issue with your switch. As for the IPv6 config, you really should not hard reference a prefix allocation unless you are 100% sure they are static as you will break your config easily. The default IPv6 address assignment ...
by biomesh
Wed Sep 22, 2021 2:18 pm
Forum: RouterBOARD hardware
Topic: NetPower 16p.... Rubbish PoE design. Workarounds?
Replies: 20
Views: 4638

Re: NetPower 16p.... Rubbish PoE design. Workarounds?

or is your NetPower 16P capable of delivering 48V while being powered at 24V ?
These devices don't have a way for you to select what the power source is for the switch itself. It will use the source with the highest voltage.
by biomesh
Wed Sep 22, 2021 2:09 pm
Forum: Wireless Networking
Topic: Client can connect to 5GHz only after disabling 802.11ac [SOLVED]
Replies: 17
Views: 7459

Re: Client can connect to 5GHz only after disabling 802.11ac [SOLVED]

Just a guess since there is no export, but the channels could be set to Auto and it's using a dfs channel. Some devices won't even attempt to look at anything in the dfs range.
by biomesh
Mon Sep 20, 2021 4:37 pm
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 84103

Re: v7.1rc4 [development] is released!

Removing and re-adding the veth interface and container allowed it to start again. Containers should be able to start properly after an OS upgrade.
by biomesh
Mon Sep 20, 2021 3:09 pm
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 84103

Re: v7.1rc4 [development] is released!

My chr test system can no longer start the container that worked on rc3. No debug log output at all.
by biomesh
Sun Sep 19, 2021 4:02 pm
Forum: General
Topic: CRS312-4C+8XG L2 VLAN slow performance [Fixed]
Replies: 8
Views: 1688

Re: CRS312-4C+8XG L2 VLAN slow performance, misconfiguration?

Run iperf tests through endpoints connected through the switch, not the bandwidth test on the switch itself.
by biomesh
Fri Sep 17, 2021 9:04 pm
Forum: Wireless Networking
Topic: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz [SOLVED]
Replies: 5
Views: 1747

Re: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz [SOLVED]

You can specify multiple capsman servers on a cap but it will only use one at a time.
by biomesh
Fri Sep 17, 2021 8:32 pm
Forum: Wireless Networking
Topic: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz [SOLVED]
Replies: 5
Views: 1747

Re: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz [SOLVED]

Click the down arrow next to that field to get another value to select wlan2.
by biomesh
Fri Sep 17, 2021 2:10 pm
Forum: RouterOS beta
Topic: PLEASE MikroTik made NetInstall version for Docker....
Replies: 41
Views: 7604

Re: PLEASE MikroTik made NetInstall version for Docker....

The linux netinstall docs are here:

https://help.mikrotik.com/docs/display/ ... nsforLinux

I saw the segfaults, but I think it was before I exposed the ports in the container or I had something else misconfigured.
by biomesh
Fri Sep 17, 2021 4:33 am
Forum: General
Topic: Inconsistent static DHCP with SFP+/DAC
Replies: 4
Views: 1053

Re: Inconsistent static DHCP with SFP+/DAC

Is the client Id the same in the lease? This is really the unique identifier and if you don't have one on the lease, it falls back to the Mac address.

I would just check to see if the device connected is trying to send a different client Id or let's say one with all zeros.
by biomesh
Thu Sep 16, 2021 10:38 pm
Forum: Wireless Networking
Topic: DIfferent access list for each Cap [SOLVED]
Replies: 6
Views: 2306

Re: DIfferent access list for each Cap [SOLVED]

It has nothing to do with roaming. It just has to do with the creation of the capsman interfaces. If you are going to use access rules for specific AP interfaces, then you will want "create enabled" vs "create dynamic enabled". I had capsman set with dynamic interfaces until I ne...
by biomesh
Thu Sep 16, 2021 2:24 pm
Forum: Wireless Networking
Topic: DIfferent access list for each Cap [SOLVED]
Replies: 6
Views: 2306

Re: DIfferent access list for each Cap [SOLVED]

Yes, just create access rules using the interface option. The first rule would be for the external AP(accept). If you have two radios then you would have two rules. Then underneath those you would have the rules for the internal aps, but for every accept rule, also add the signal range you are looki...
by biomesh
Thu Sep 16, 2021 3:20 am
Forum: General
Topic: CRS112 sw bridge to hw bridge
Replies: 5
Views: 1334

Re: CRS112 sw bridge to hw bridge

The best examples are in the wiki:

https://wiki.mikrotik.com/wiki/Manual:C ... s_examples

(tdw beat me by a few minutes)
by biomesh
Wed Sep 15, 2021 1:22 pm
Forum: RouterOS beta
Topic: PLEASE MikroTik made NetInstall version for Docker....
Replies: 41
Views: 7604

Re: PLEASE MikroTik made NetInstall version for Docker....

I don't have a Mac os device, but normally with netinstall, the client address (-a) is on the same network as the server. When running on routeros docker, netinstall will fail to run if this is not correct.

So in your case it could be "-a 192.168.65.100"
by biomesh
Wed Sep 15, 2021 1:21 am
Forum: Containers
Topic: v7.1rc3 adds container support
Replies: 493
Views: 164437

Re: v7.1rc3 adds Docker (TM) compatible container support

about time someone tried to use nextdns. is it working well? sending client device names etc?
It works just like the nextdns client that I run on some raspberrypis - no problems at all.