Community discussions

MikroTik App
 
Pigsfoot
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Sat Oct 25, 2014 1:16 am

Unable to have two active IPSec tunnels

Thu Oct 20, 2022 11:03 am

Hi,

We have 2 x IPSec tunnels that connect to the same supplier ( Peer details are all the same ), the only difference between the two connections is each tunnel has a different Dst Addresses.

The problem we have is the two connections don't seem to be able to be active at the same time. If you enable both one will have a PH2 State of "No Phase2" and if you disable the one that works the other one then connects and visa versa

Is there a way to have both tunnels active at the same time, ultimately they have different subnets so i cant understand why its not working. At the moment the only way we can get it working is to disable one tunnel to be able to connect to the one we need manually.
 
kelarlee
newbie
Posts: 25
Joined: Thu Dec 27, 2018 5:48 pm

Re: Unable to have two active IPSec tunnels

Thu Oct 20, 2022 11:33 pm

Check your level of ipsec policies. IP>IPSEC>Policies>double click on your policie>Action tab>Level>unique.
 
Pigsfoot
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Sat Oct 25, 2014 1:16 am

Re: Unable to have two active IPSec tunnels

Fri Oct 21, 2022 10:39 am

Yes, both policies have an action level set to unique

Who is online

Users browsing this forum: Hominidae and 26 guests