Community discussions

MikroTik App
just joined
Topic Author
Posts: 1
Joined: Wed Sep 29, 2021 6:38 pm

The Dude - missing interfaces

Wed Sep 29, 2021 6:58 pm

No interfaces to choose from when setting properties of a Link to snmp, to view Rx/Tx speeds. Tried reinstall, different versions, vaccum-db. Nothing working.

Played around with program a little, and figured out that the interface setting (properties of link) reports the interface on the client end. do I add config/driver/etc for devices that aren't automatically detected?
just joined
Posts: 1
Joined: Sat Oct 16, 2021 3:00 pm

Re: The Dude - missing interfaces

Sat Oct 16, 2021 3:25 pm


Have you configured the SNMP settings in your MikroTik? Make sure you've added a "community" and have the correct one selected under "trap community" in SNMP settings. I believe selecting a "trap version" is also necessary.
SNMP Settings.png
If you want to check Rx/Tx traffic between two devices (Ubiquiti NanoBeams for example), ensure you have configured the SNMP agent on both NanoBeams by selecting the "SNMP community" which was created in your MikroTik under "SNMP settings".
SNMP Agent.png
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 7 guests