Community discussions

MikroTik App
 
Sneed
just joined
Topic Author
Posts: 2
Joined: Fri Feb 11, 2022 3:44 pm

Upstream must route through other ASN

Sat Sep 10, 2022 5:57 pm

I have a network scrubber on an ASN that my upstream peers with. I am on RouterOS7 and I am trying to force the paths to go through that ASN.

How do I accomplish this? I am trying rules like this:

filtered-out
if (dst in ::/0) { set bgp-communities xxx:1001; accept; }

uplink-in
if (dst in myprefix/24) { if(bgp-as-path .xxx.) { accept; } else { reject; } }

I've *briefly* managed to get routing how I want it, and I don't know what I did to accomplish it. Right now, my IPs don't route at all.
 
mducharme
Trainer
Trainer
Posts: 1760
Joined: Tue Jul 19, 2016 6:45 pm
Location: Vancouver, BC, Canada

Re: Upstream must route through other ASN

Sat Sep 10, 2022 11:38 pm

Careful here, anybody who might normally offer help. I strongly suspect (based on certain specific details) that the OP is the admin of the notorious kiwifarms doxxing site trying to bring it back online.

See this link: https://twitter.com/DropKiwifarms/statu ... 4170761216

The capitalization and spacing of "RouterOS7", the involvement of a /24, the use of a CCR1016-12G (mentioned in their previous post on this forum), and needing to send the traffic through a certain ASN but not knowing how to do it is all an exact match, as is the specific timing of this request. The fact that it briefly started working and then stopped working again is also a commonality.

EDIT: The username "sneed" is apparently from a Simpsons meme that I am told that kiwifarms users are obsessed with.

Who is online

Users browsing this forum: No registered users and 5 guests