Community discussions

MikroTik App
just joined
Topic Author
Posts: 1
Joined: Sun Sep 11, 2022 9:20 am

v7.5 BGP Route sync

Sun Sep 11, 2022 9:39 am


i want to announc many /32 subnets via bgp as 1 /24 subnet.
i have seen in the hekp, that this feature was turn't off in V7 and i don't want to announce over 200 routes when one is needed

had any one the same problem and solved it?
/interface bridge
add name=Test
add name=lo
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
set 0 name=serial0
set 1 name=serial1
/routing ospf instance
add disabled=no name=ospf-instance-1 router-id=
/routing ospf area
add disabled=no instance=ospf-instance-1 name=ospf-area-1
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip address
add address= interface=lo network=
add address= interface=ether6 network=
add address= interface=Test network=
/ip firewall address-list
add address= list=BgpOut
/routing bgp connection
add as=655232 disabled=no input.filter=Core local.address= .role=ebgp \
multihop=yes name=bgp1 output.filter-chain=Core .keep-sent-attributes=yes \
.network=BgpOut remote.address= .as=65531 router-id= \
/routing filter rule
add chain=Core disabled=no rule="if (dst in {accept}"
/routing ospf interface-template
add area=ospf-area-1 disabled=no interfaces=lo,ether6 networks=\,
/system identity
/system logging
add topics=bgp
/system routerboard settings
set auto-upgrade=yes
/tool romon
set enabled=yes
/tool romon port
set [ find default=yes ] forbid=yes
add disabled=no interface=ether6
add disabled=no interface=ether4

Who is online

Users browsing this forum: No registered users and 7 guests